Kenwood DNX6980 dnx7180 (pdf) - Page 72
System Setup, User interface
UPC - 019048192707
View all Kenwood DNX6980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
System Setup NOTE • Each operation in this section can be started from the multi function menu. 1 Touch [Menu] on any screen. TOP Menu screen appears. 2 Touch [SETUP]. 3 Touch [System]. Return to the Top page Setting Up Beep Turns the key touch tone on or off. Default is "ON". Remote Sensor Selects a remote control signal. Default is "ON". Language Select the language used for the control screen and setting items. See Language setup (P.72). Text Scroll Allows scrolling of text display on the source control screen. Select from "Auto"/"Once"/"OFF". Auto (Default): S crolls the text automatically. Once: Allows you to scroll the text only once automatically when updated. OFF: Does not scroll the text automatically. System Menu screen appears. See the following section for each setting. • Set up the user interface (P.71) • Adjust touch panel (P.72) • Set up security (P.72) • Set up external switch (P.73) • Set up memory (P.73) User interface You can setup user interface parameters. 1 Touch [User Interface] in the list. User Interface screen appears. 2 Set each item as follows. Drawer Close Sets whether to close the common menu (P.16) automatically. Default is "Auto". Animation Sets whether to display animation. Default is "ON". Secondary Sets whether to display the navigation information in the audio screen or vice versa. Default is "ON". Panel Switch Sensitivity Adjusts the sensitivity of the front panel button (ATT button, etc.) High: Sets sensitivity to high. Middle (Default): Sets sensitivity to middle. Low: Sets sensitivity to low. 71