Kenwood DNX6980 dnx7180 (pdf) - Page 89
Space Enhancer , Listening Position
UPC - 019048192707
View all Kenwood DNX6980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Return to the Top page Audio Setting Up NOTE • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. • When the dual zone function is set to on, the following functions are not available. • Output from the subwoofer • Subwoofer Level/Bass Boost (P.85) • Equalizer Control/Space Enhancer / Listening Position (P.85, 88, 88) • DSP Bypass Control Type (DTA) Setup /Speaker Setup/Car (P.84, 81, 83) Space Enhancer 1 Touch [Space Enhancer]. Listening Position You can adjust the sound effects according to your listening position. 1 Touch [Position]. Position screen appears. 2 Select listening position from [Front R] (Right front), [Front L] (Left front), [Front All] (All front), [All], and [User] using [2] and [3]. Space Enhancer screen appears. 2 Touch [Small], [Large], or [OFF]. Each setting value indicates the soundscape level. NOTE • This setting is not available during tuner source. NOTE • You can store present setting in memory by touching [P1], [P2], or [P3] for 2 seconds. You can also recall the setting by touching corresponding number. • The final distance is adjusted to the total of car type set up value (P.83) and position setup (both position and position DTA) value. • If you change the car type set up value (P.83), the position is set to [All]. • Only the adjusted distance of position setup (position and position DTA values) is stored in memory. Therefore, the final adjustment distance changes if you change the car type set up value (P.83). 88