Kenwood DPX500BT Quick Start Guide - Page 9

• Mount the unit so that the mounting angle is 30° or less. • Reception may become poor if there are metal objects near the Bluetooth antenna. (DPX500BT only) Bluetooth antenna unit For Good Reception To assure good reception, note the following: • Communicate with the cell-phone within the line- of-sight distance of 10 m (30 ft). The communication range becomes shorter depending on the surrounding environment. The communication range also becomes shorter when there is an obstacle between this unit and the cell-phone. The above maximum communication range (10 m) is not always assured. • A broadcast station or walkie-talkie located nearby can interfere with communication due to a too strong signal. DPX500BT only Installing the Microphone unit 1 Check the installation position of the microphone (Accessory 7). 2 Remove oil and other dirt from the installation surface. 3 Install the microphone. 4 Lay the cable up to the unit with it secured at several positions using tape or the like. ⁄ • Install the microphone as far as possible from the cell-phone. Accessory 7 Fix a cable with a commercial item of tape. Peel off the release coated paper of double-face adhesive tape to secure the microphone on the place shown above. Adjust the direction of the microphone to the driver. ! CAUTION Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot. English | 9