Kenwood Here2Everywhere Operating Instructions - Page 16
Factory Defaults, Specifications
View all Kenwood Here2Everywhere manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Program Alert: Program Alert On/Off Use this selection to enable or disable the Program Alert. Auto Shutdown 30 This gives you the option of having Here2Everywhere automatically shut off after a 1-hour idle period. After 59 minutes of inactivity, a display prompt will appear on the screen with the option "Cancel Auto Shutdown." Press the Control Knob (or the remote Select button) to cancel the shutdown and restart the idle timer. Sleep Mode This gives you the option to have the unit shut down after a specific period of time: 15, 30, 45, or 60 minutes. Factory Defaults Select this menu option to restore Here2Everywhere to all factory defaults. Specifications Audio output (560 ohms 776mV RMS Fuse 3A fast blow Power supply requirements 9 ~ 16V, negative ground Dimensions ......110mm(L) x 74mm(W) x 30mm(D) Troubleshooting Guide Problem No power on Here2Everywhere (power indicator/display not illuminated) No sound Display reads "Acquiring Signal" Display reads "Antenna error" Display reads "Call 1-888-539-SIRIUS to Subscribe" Display reads "Invalid Channel" Here2Everywhere operates erroneously Sound mutes intermittently Possible Cause Corrective Action Power supply/cigarette lighter adapter is not properly connected Make sure power supply/adapter is properly connected Blown fuse in cigarette lighter adapter Here2Everywhere not properly seated in docking cradle Check the fuse; if blown, replace with supplied spare fuse 31 Remove the Here2Everywhere from cradle and put it back in the cradle, taking care to seat it securely in the cradle grooves Car cigarette lighter socket fuse is blown Use the cigarette lighter to test the car's cigarette lighter socket and fuse. If the cigarette lighter doesn't glow or get hot, check and replace the fuse in the fuse panel. Note: use caution with hot cigarette lighter. Audio cable is not properly connected Make sure cable is properly connected Signal is weak or can't be found Check the "Antenna Aiming" screen (see pg. 27); Change the antenna/vehicle location to maximize signal quality Metallic window screen is interfering with reception Move antenna to window with a non-metallic screen The antenna is not connected Verify antenna connections The antenna or cable is faulty Replace antenna SIRIUS subscription has not been activated, or the specific channel is blocked by SIRIUS Call SIRIUS to activate or update your subscription The channel number entered is invalid or the channel does not exist Select a different channel number Microprocessor error Turn the power off (press the Power button); wait 5-10 seconds, then turn the power on again Turn the unit's power off; remove it from the dock; wait 5-10 seconds; replace it in the dock and turn power back on If the problem persists, consult your Kenwood dealer Metallic window screen is interfering with reception Move antenna to a window with a non-metallic screen