Kenwood Here2Everywhere Operating Instructions - Page 8
Activating Your SIRIUS, Subscription - sirius satellite radio
View all Kenwood Here2Everywhere manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
be used to "jump" back to the previous channel. Power Ch Cat. () Buttons: Enters Category List Mode Cat.< Select and moves from category to category. Preset Number Buttons, 1-6: Sets and selects preset channels. 14 Control Knob: Turn to change channels or move around in menus. Ch Mute Number Keys Cat.> Jump Display • Press to make selections in menus and lists Direct • Press and Hold for about 2 seconds to go back to a previous channel. Band Preset P. Tune Back Memo Remote Control Functions Power ( ) Key: Turns Here2Everywhere off and on. Select Key: Used to select items in a list after navigating the list with CH Up and Down Keys. CAT () Keys: Enters Category List Mode and moves from category to category. CH Up and Down Keys: Moves up and down one channel (in Channel Seek mode), or one preset (in Preset Seek mode). Mute Key: Turns off the audio of Here2Everywhere. Display Key: Switches the display between different modes, with artist and song title information displayed in various sizes. Jump Key: "Jumps" over to a special stored channel, such as a local traffic channel; then can be used List to "jump" back to the previous channel. Number Keys: Numbers 1-6 select preset channels in the currently selected band. Numbers 0-9 are used with the Direct button to tune directly to a specific channel number. Direct Key: Enters Direct Tuning Mode. Preset Key: When followed by Number Key 1-6, stores the current channel as preset 1-6 in the current bank. Band Key: Cycles through the 5 banks of presets. List Key: Enters and cycles between several list Modes: Channel, Artist, and Song Title. P. Tune Key: Switches back and forth between Preset Tune Mode and Channel Tune Mode. Back Key: Return to the most recently tuned channel (previous channel). Memo Key: Saves song and artist information. Installing Batteries in the Remote Note: Do not expose the remote control to high temperatures or direct sunlight. This could damage or deform the case and result in battery leakage or other harm. 1. Remove the battery cover as shown on the left. 2. Install two AAA batteries as shown on the right. 3. Replace the battery cover. Activating Your SIRIUS Subscription Before you can listen to Here2Everywhere, you must subscribe to SIRIUS Satellite Radio's service. 15 Note: You can activate your SIRIUS subscription from either the car docking cradle or from the home docking cradle. Once it is activated in one, it will work in the other, provided the antenna has a clear view to the sky. Follow these steps to activate your service: 1. Make sure that Here2Everywhere is properly connected and that its antenna is oriented to receive the SIRIUS satellite signal (see Installation sections for details). 2. Place Here2Everywhere in the docking station by sliding the unit all the way into the cradle so that the connector at the bottom of the unit makes proper contact in the cradle. 3. Press the power button to turn Here2Everywhere on. After displaying the SIRIUS logo, the display will read "Acquiring Signal." Once the SIRIUS satellite signal is received, the display will change to "Call 888-539-SIRIUS to Subscribe."