Kenwood Here2Everywhere Operating Instructions - Page 9

Note: If the display reads, "Updating Channels," the receiver is getting the latest channel listing from the SIRIUS satellites. Give it 5 minutes to complete you. (You can also contact SIRIUS on the Internet at: www.siriusradio.com and click on the "Activate" link.) before moving to the next step. 4. If your Here2Everywhere has been properly con16 nected and the antenna is receiving the SIRIUS signal (Preview Channel #184), you will hear audio. If you do not hear audio, re-orient the antenna until you do. (See Antenna Aiming, on pg. 27 to use the ANTENNA SIGNAL screen.) 8. Once your subscription has been activated, the display will read "Subscription Updated" for a few seconds. Press any button. The Here2Everywhere will return to the Default display screen. At this point, try turning the Control Knob. You should have access to many channels now. • Channel #184 is the SIRIUS Preview Channel. You will not be able to tune to any other channels until you activate your SIRIUS subscription. Note: If you've previously activated your subscription and then deactivated it, the Preview Channel will be mute. You will still see the message, "Call 888-539-SIRIUS to Subscribe." 5. Press the menu button on Here2Everywhere to enter the Menu Options. Make sure the first item, "SIRIUS ID," is highlighted, then press the Control Knob (or the remote Select button). 6. Your unit's unique 12-digit SIRIUS ID Number will be displayed. Write the number down, and have your credit card handy. 7. You can also call SIRIUS toll-free at 1-888-539SIRIUS (7474), and the operator will instruct Default Screen Removing Here2Everywhere From the Car Docking Cradle When docked in the Car Docking Cradle, Here2Everywhere has a secure locking mechanism to hold it in place while the vehicle is in motion. To remove Here2Everywhere from the Car Docking Cradle, press the small button on the back of the unit and gently slide Here2Everywhere out. Channel number Channel Press it again to see the list of currently playing name artists, and again to see the currently playing song Signal strength indicator Artist and titles. Press the Control Knob (or on the remote, the song title Select button) to return to the default screen. Category name Clock Basic Operation Preset bank Selecting Channels indicator 17 (A-E) Direct Tuning Using the Control Knob To enter a specific channel number, press the After you have activated your SIRIUS subscription, the Default Display screen will appear (see above). The Default Display screen has two font sizes: Medium and Large (medium is shown above). You can change font sizes by pressing the Display button. Control Knob to enter Direct Tuning Mode. Turn the Control Knob to select the first digit of the channel number, then press the Control Knob to confirm this choice. Repeat this step for the second and third digits of the channel number. On the above screen, you'll see the current SIRIUS channel number (021), the channel name, the artist and song title, the category, the time, the Note: For channels under 100, simply press the control knob while the third digit is still blank. Direct Tuning Using the Remote preset bank indicator (A), and the antenna signal Press the Direct button on the remote to enter strength indicator. (When the unit is muted via the Direct Tuning Mode. Use buttons 0-9 and the Select remote Mute button, the antenna signal strength button on the remote to enter the desired SIRIUS indicator is replaced with a Mute indication.) channel number. Basic Operation and Screens The previous screen is the Default screen. However, you can choose several different screens. Press and hold the Display button (press the List button on the remote) to see a list of channels. Selecting Channels With the Control Knob To select a channel number through scrolling, turn the Control Knob to the left or right to dial up or down channels. The selected channel will automatically