Kenwood KDC-X395 Instruction Manual - Page 8

Muting upon the reception of a phone call (KDC-X395/ KDC-348U only) To use this feature, connect the MUTE lead to your telephone using a commercial telephone accessory. (See "Installation Manual" on a separate volume.) When a call comes in, "CALL" appears. ■ The audio system pauses. ■ To continue listen to the audio system during a call, press SRC. "CALL" disappear and the audio system resumes. When a call ends, "CALL" disappear. ■ The audio system resumes. Listening to the Radio ■ Hold for about 2 seconds to memorize the current station or the selected Program Type. (Refer to [PTY SEARCH] on the table below to select the Program Type.) ■ Press briefly to recall memorized station (or Program Type after entering the PTY search mode). 1 Press SRC to select "TUNER". 2 Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ AM). 3 Press 4 / ¢ to search for a station. Using the remote controller (RC-405) #FM+ / *AM- : Selects band. 4 / +¢ : Selects station. 1 - 6 : Selects preset station. Adjust [SETTINGS] mode settings While listening to the radio... 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. See table below for selection. 4 Hold to finish the procedure. Item Selectable setting (Preset: *) SEEK MODE Selects the tuning mode for 4 / ¢ buttons. AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset memory. ; MANUAL: Manually search for a station. AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing is not activated). (Selectable only if [NORMAL] is selected for [PRESET TYPE].) (page 5) TI ON: The traffic information automatically when the traffic bulletin starts. ; OFF *: Cancels. (Not applicable if "AM" is selected) 8 English