Kenwood KDC-X494 kdcx494 (pdf) - Page 26

Satellite Radio tuner (Optional Accessory) control Basic Operation Selecting Satellite Radio source Press the [SRC] button. Select the "SIRIUS" or "XM" display. For how to select source item, refer to (page 4). ⁄ • You need to register to the service provider to receive the service by Satellite Radio. Consult the service provider if "CALL ... TO SUBSCRIBE" appears. • The radio may take a little time to start receiving after you select the Satellite Radio source. • If the signal reception fails, "Acquiring Signal"/ "No Signal" appears. Selecting the channel Push the Control knob towards right or left. Selecting the Preset Band Push the Control knob toward up. Each time you push the knob, the preset band alternates between the SR1, SR2, SR3 and SR4. Category and Channel Search Selecting the channel and category you want to receive. 1 Enter Category and Channel Search mode Press the [ ] button twice. 2 Select the Category Turn the Control knob to select Category, and then press the [ENTER] button. 3 Select the Channel Turn the Control knob to select Channel, and then press the [ENTER] button. Cancelling Category and Channel Search mode Press the [ ] button for at least 1 second. ⁄ • You cannot Channel search until the category information is acquired. Channel Preset Memory Putting the channel in the memory. 1 Select the channel to put in the memory Push the Control knob towards right or left. 2 Enter Preset Memory mode Press the [ ] button. 3 Select the number to put in the memory Turn the Control knob. 4 Register channel to preset number Press the [ENTER] button for at least 2 seconds. Cancelling the Preset Memory mode Press the [ ] button. ⁄ • Only the channel number is stored. Category information is not stored. Preset Tuning Recalling the channels in the memory. 1 Enter Preset Tuning mode Press the [ ] button. 2 Select a desired channel in the memory Turn the Control knob. 3 Recall the channel Press the [ENTER] button. Cancelling Preset Tuning Press the [ ] button. Channel Scan Every receivable Channel is checked for 10 seconds. 1 Start Channel Scan Press the [S.MODE] button. 2 Release it when the channel you want to listen to is received Press the [S.MODE] button. 26 | KDC-X494/ KDC-MP445U/ KMR-440U