Kenwood KDC-X494 kdcx494 (pdf) - Page 35

Adding a voice dialing command Add a voice tag to the phonebook for voice dialing. You can register up to 35 voice tags. 1 Enter Bluetooth mode Press the [FNC] button for at least 1 second. "BT MODE" is displayed. 2 Enter Function setting mode Press the [FNC] button. 3 Select Phonebook name edit mode The item can be selected and determined as follows. "Settings" ➜ "Voice Tag" ➜ "PB Name Edit" To select the item, turn the Control knob. To determine the item, press the [ENTER] button. 4 Search for the name to register Turn the Control knob to select name, and then press the [ENTER] button. If a voice tag has already been registered for a name, "*" is displayed before the name. 5 Select a mode Turn the Control knob. Display "Register" "Check"* "Delete"* Operation Register a voice tag. Play a voice tag. Delete a voice tag. *Displayed only when a name for which a voice tag has been registered is selected. Selecting "Register" (Regist) 6 Register a voice tag (first) Press the [ENTER] button. When you hear a beep, speak the voice tag within 2 seconds. 7 Confirm the voice tag (second) Press the [ENTER] button. When you hear a beep, speak the same voice tag again within 2 seconds. "Completed" is displayed. 8 Exit Function setting mode Press the [ ] button for at least 1 second. Return to step 2. You can register another voice tag continuously. ⁄ • If your voice cannot be recognized, a message is displayed. (Refer to (page 41)) Pressing the [ENTER] button allows you to retry voice input. Selecting "Check" (Play) 6 Press the [ENTER] button. Play the registered voice and return to step 2. Selecting "Delete" (Delete) 6 Delete a voice tag Press the [ENTER] button. 7 Turn the Control knob to select "YES", and then press the [ENTER] button. Exit Bluetooth mode Press the [SRC] button. English | 35