Kenwood KDC-X879 Instruction Manual - Page 32
Direct Access Tuning, Station Preset Memory, Auto Memory Entry, Preset Tuning
View all Kenwood KDC-X879 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Tuner features Function of remote Direct Access Tuning Entering the frequency and tuning. 1 Select the band Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote. "- - - -" is displayed. 3 Enter the frequency Press the number buttons on the remote. Example: Desired frequency 92.1 MHz (FM) 810 kHz (AM) Press button [0], [9], [2], [1] [0], [8], [1], [0] Canceling Direct Access Tuning Press the [DIRECT] button on the remote. Station Preset Memory Putting the station in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [4] or [¢] button. 3 Select the key function section Press the [NEXT] button. Repeatedly press the button until "[1]" - "[6]" are displayed above the [1] - [6] buttons. Refer to 'Notes on Multi-function Key System' (page 9). 4 Put the frequency in the memory Press the desired [1] - [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] - [6] button. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. Preset Tuning Calling up the stations in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "[1]" - "[6]" are displayed above the [1] - [6] buttons. Refer to 'Notes on Multi-function Key System' (page 9). 3 Call up the station Press the desired [1] - [6] button. 32 | English