Kenwood KIV-BT901 Instruction Manual - Page 56
Registering Bluetooth Device (Pairing), Select BT Settings
UPC - 019048194473
View all Kenwood KIV-BT901 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Function of KIV-BT901 KIV-701 with KCA-BT300/BT200 (Optional Accessory) Bluetooth Setup Registering Bluetooth Device (Pairing) To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to 5 Bluetooth devices to this unit. Registering from Bluetooth devices 1 Turn on this unit Press the [SRC] button. 2 Start registering this unit by operating the Bluetooth device By operating the Bluetooth device, register the hands-free unit (pairing). Select "KENWOOD BT USB/R-3P1"/ "KCA-BT300"/ "KCA-BT200" from the list of connected units. 3 Enter a PIN code Input the PIN code ("0000") in the Bluetooth device. Check that registration is complete on the Bluetooth device. ✍✍PIN code is set to "0000" as the default. You can change this code. Refer to (page 57). 4 By operating the Bluetooth device, start hands- free connection. Registering from this unit 1 Enter Bluetooth mode KIV-BT901: Press the [ ] button. KIV-701: Press the [iPod] button for at least 1 second. 2 Enter Bluetooth device registration mode Turn the [Volume] knob and press it when the desired item is displayed. Select "BT Settings" > "Pairing" > "Device Registration". Search for the Bluetooth device. When search is completed, "Finished" is displayed. 3 Select a Bluetooth device Turn the [Volume] knob and press it when the desired item is displayed. 4 "Confirm Phone" is displayed (KCA-BT300 only) When "Confirm Phone" is displayed, confirm connection with a cell-phone operation. If "Pairing Success" is displayed, proceed to step 7. If "Pairing Failed"/ "Connect NG" is displayed. Press 56 | KIV-BT901/ KIV-701 the [Volume] knob and proceed to steps 5. 5 Input the PIN code 1. Turn the [Volume] knob and press it when the desired item is displayed. Select the digit. 2. Turn the [Volume] knob to select the numbers, and then press the [Volume] knob. 6 Transmit the PIN code Press the [Volume] knob for at least 1 second. If "Pairing Success" is displayed, registration is completed. When "Confirm Phone" is displayed, confirm connection with a cell-phone operation. ✍✍If the error message appears even though the PIN code is correct, try . 7 Return to the device list Press the [Volume] knob. 8 Exit BT Setting mode Press the [MENU] button for at least 1 second. ⁄ • This unit allows up to eight digits to be input for a PIN code. If a PIN code cannot be input from this unit, it can be input from the Bluetooth device. • If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device. Registering Special Bluetooth device Allow registration of a special device that cannot be registered normally (pairing). 1. Select Special device registration mode Turn the [Volume] knob and press it when the desired item is displayed. Select "BT Settings" > "Detailed Setup" > "Special Device Select". A list is displayed. 2. Select a device name Turn the [Volume] knob and push the center when the desired device name is displayed. If "Completed" is displayed, registration is completed. 3. Go through the procedure step 3 of and complete the registration (pairing). Cancelling Special device registration mode Press the [MENU] button for at least 1 second. ⁄ • If the device name is not in the list, select "Other Phones".