Kenwood KTC-H2A1 Instruction Manual - Page 11
Setting/using stream presets - new
UPC - 019048148148
View all Kenwood KTC-H2A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
• After you make your selection, the display will revert to the Normal Operation screen Note: In the Stream List, Artist List and Song List modes, if you don't want to make a selection, press the POWER button on the front panel to exit the mode and return to the Normal Operation screen for the active stream. Setting/using stream presets Setting stream presets You can store up to 24 of your favorite streams as presets, for quick access. Presets are stored in 4 banks, each containing 6 stream presets. 1. Press the PRE (Preset) button to activate the preset bank you want. The selected bank is shown in the lower left corner of the Normal Operation Screen (right). Normal Operation Screen, showing Preset Bank and Preset Number Readout 2. Select the stream you want to preset (see Basic Operation and Selecting Music, pg. 17-18) 3. Hold the number button you want to store the stream in for at least 2 seconds • The selected preset number will flash and then remain lit on the display to show that it has been memorized. • If the preset button already has a stream stored in it, it will be replaced with the new stream Tuning stream presets The 6 presets in the active bank can be selected by pressing the "1" - "6" buttons 1. Press the PRE button to cycle through the four banks of preset stations. The display will show the current preset bank and active preset number in the lower left corner. 20 Here2Anywhere Instruction Manual (ver. 2) 2. When the desired preset bank is displayed, use the "1" - "6" buttons to tune the desired preset stream Searching for a stream preset (Preset List Screen) There are two ways you can search for a stream preset. For both, hold the PRE button for at least 1 second to enter the Preset Tune mode. The Normal Operation Screen will change so that the preset bank and preset number will be highlighted (top, right). Option 1: Use the up & down arrow buttons to move through the presets. Each time you change a preset its number will appear on the display and the stream will play. Preset Tune Screen Option 2: Press the SELECT button. The Preset List Screen will appear on the display, listing all of the stream presets that have been programmed (bottom, right) • Use the cursor up & down buttons to scroll through the list. Press the SELECT button when the desired stream is highlighted on the display to select it. In either mode, when you're finished searching for a Preset List Screen preset, press the POWER button to exit and return to the Normal Operation Screen. Here2Anywhere Instruction Manual (ver. 2) 21