Kenwood KTC-H2A1 Instruction Manual - Page 16
Lock Code Screen, Enter New Lock Code Screen, Confirm Number Screen, Startup Mode Screen, Lock Code
UPC - 019048148148
View all Kenwood KTC-H2A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
To lock a stream, in Step 3 above, instead of momentarily pressing the SELECT button, hold the button for more than 1 second. A "-" and a padlock will be displayed next to the stream number. Lock Code Setup If you have locked any streams in the Channel Lock mode, you will need to enter a 4-digit lock code to unlock them. The factory default lock code is "1 1 1 1". You can change the Lock Code to your own preference: 1. While in the Setup Mode, press the left or right arrow but- ton until the Lock Code Setup screen appears (top right): Lock Code Setup Screen 2. Press the up or down arrow button. The Lock Code screen appears (middle, right): 3. Using the preset 1 - 6 buttons, enter the factory default code "1 1 1 1". The screen's second line will change from "_ _ _ _" to If you enter an incorrect number, use the left arrow button to delete the incorrect number; then re-enter the correct one. Lock Code Screen 4. Press the Memory button. The Enter New Lock Code screen appears (bottom, right). • If you entered the code incorrectly, "Code Error" will be displayed, and the Enter New Lock Code screen Enter New Lock Code Screen 30 Here2Anywhere Instruction Manual (ver. 2) reappears. Repeat Steps 3 - 4. 5. Using the preset 1 - 6 buttons, enter your new 4-digit code. The screen's second line will change from "_ _ _ _" to "* * * *". 6. Press the MEMORY button. The Confirm Number screen appears (right). 7. Re-enter your new 4-digit code. The screen's second line will change from "_ _ _ _" to "* * * *". Confirm Number Screen 8. Press the MEMORY button. The display will change to "New Code Confirmed" • If you entered the code incorrectly, "Code Error" will be displayed, and the Enter New Lock Code screen reappears. Repeat Steps 5 - 8. Startup Mode You can select which screen is displayed when you turn Here2Anywhere's power on. 1. While in the Setup Mode, press the left or right arrow button until the Startup Mode screen appears (right): 2. Use the up & down arrow buttons to highlight the screen you want for Startup: Normal Operation, Channel List (Stream List) or Category List (see pages 17 - 18): 3. Press the SELECT button. Startup Mode Screen Here2Anywhere Instruction Manual (ver. 2) 31