Kenwood KTC-HR300 Instruction Manual - Page 4
Operations -CD Receiver - manual
UPC - 019048183231
View all Kenwood KTC-HR300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Operations -CD Receiver- Tuning Selecting the station. 1 Select HD Radio source Press the [SRC] button. Select the "HD Radio"/"HD RADIO" display. 2 Select the HD FM band Press the [FM] button. Each time the [FM] button is pressed it switches between the HF1, HF2, and HF3 bands. Select the HD AM band Press the [AM] button. 3 Tune up or down program Press the [4] or [¢] button. If the sub channel is available in Digital FM broadcast when is set to Auto seek or Manual, the channel can be switched. Example: [4] Analog FM 1 Analog FM ™ Analog FM £ Digital FM 2 Digital FM-1ch 3 Digital FM-2ch 4 ... [¢] (HD FM band) Digital FM-8ch 0 Digital FM ! : Auto seek or Manual : Auto mode • During the reception of 1, tune up: 2➡3➡4... • During the reception of !, tune down: !➡0... ⁄ • Using the modes can be switched to digital broadcast automatic switching, analog broadcast only, or digital broadcast only. • When "Digital" has been set with , the seek time will be longer to allow a check of whether the transmission is a digital broadcast. • It will take a few seconds to receive the digital broadcasting after selecting the frequency. • When Tune up button is pressed, it will switch to the next frequency if it is switched before receiving the Digital broadcasting. (™➡£) • When Tune down button is pressed, it will be received from Analog broadcasting if the Digital broadcasting has never been received. (!➡£) • When is set to "Manual", the frequency will be switched while pressing [4] or [¢] buttons. • Some of the models have the following displays when the Main channel and Sub channel are switched. - "Main"/"Primary"/"PRI": When it is switched to the Main channel 4 | KTC-HR300 - "Sub"/"Secondary"/"SEC": When it is switched to Sub channel Tuning Mode Sets the tuning mode. Press the [AUTO] button. Each time the button is pressed the Tuning mode switches as shown below. Tuning mode Display Operation Auto seek "Auto1" Automatic search for a station. Preset station seek "Auto2" Search in order of the stations in the Preset memory. Manual "Manual"/"MANU" Normal manual tuning control. Receive Mode Sets the receive mode. 1 Select menu mode using the control unit. Select the menu item. Select the "Receive Mode"/ "HDR mode" display. 2 Open Receive mode Press the setting button of the menu items in the control unit for at least 1 second. 3 Set the Receive mode Switching the setting of menu items. Each time the button is pressed the Receive mode switches as shown below. Receive mode Auto mode Digital Analog Display "Auto" "Digital" "Analog" Operation Automatically tunes to analog broadcast when receiving the digital broadcast is impossible. Digital broadcasts only. Analog broadcasts only. 4 Exit Receive mode Press the [MENU] button. 5 Exit Menu mode