Kenwood KTC-HR300 Instruction Manual - Page 5

Preset Memory Putting the frequency and channel in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency and channel to put in the memory Press the [4] or [¢] button. 3 Put the frequency and channel in the memory Press the desired [1] - [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] - [6] button. Auto Memory Entry Putting a station with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. Save 6 stations with the best reception in the memory and close Auto Memory Entry. ⁄ • Sub channel of Digital FM cannot be registered. Preset Tuning Calling up the frequency and channel in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Call up the frequency and channel Press the desired [1] - [6] button. ⁄ • "Linking" will be displayed for few seconds until it is received. • When (page 4) is set to Digital or Analog, it cannot be received if the setting is differed from the preset. English | 5