Kenwood KTC-HR300 Instruction Manual - Page 6

Operations -CD Receiver- Switching Display When you are listening to an HD Radio station, you can switch over the display information as follows. For operations, see the / / page of the instruction manual of your control unit. ⁄ • What is displayed may partly depend on control unit to be connected. HD Radio mode Information Display Station Name (8) "Station Name"/ "NAME"/ "ST NAME" Song title/ Artist name/ Album name/ "Title"/ "TITLE" Genre/ Detailed station name (128) Receive Frequency "Frequency"/ "FREQ" The number in the ( ) indicates the maximum number of displayed characters. When a current receiving station dose not send text information, the frequency is displayed. The Station name or Song title during reception of the Digital FM broadcasting displays the channel information as follows. 1Digital AM "(Station name) HD" "(Song title/ Artist name /...)" 1Digital FM "(Station name) HD" "(Song title/ Artist name /...)" 2Digital FM-1 "(Station name) HD1" "(Song title/ Artist name /...)" 3Digital FM-2 "(Station name) HD2" "(Song title/ Artist name /...)" ... • 1: When the Main channel is received • 2: The sub channel is available in Main channel which is received. • 3: When the Sub channel is received • When listening by the Analog sound, "HD" display switches to "FM" or "AM". ⁄ • In HD Radio mode, the display of Station Name or Song title should be set up. The channel information cannot be displayed in the Frequency display. • Though some models have two or more lines in the display, you cannot display the same information in both the Upper Part and the Lower Part. • In the control unit with M/S, P/S indicator, the indicator will be turned ON or OFF as described below. - 1: M/S, P/S indicator is OFF. - 2: M/S, P/S indicator is ON. - 3: M/S, P/S indicator blinks. 6 | KTC-HR300 Text Scroll Scrolls the display title. For operations, see the CD features of in the instruction manual of your control unit.