Kenwood MP6025 Instruction Manual - Page 11

System Q You can recall the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [Q] button. Each time the button is pressed the sound setting switches. Sound setting Natural User memory Rock Pops Easy Top 40 Jazz Display "Natural" "USER" "ROCK" "POPS" "EASY" "TOP 40" "JAZZ" Middle level "MID" Middle Q Factor*² "Middle Q" Treble Center Frequency*² "TRE FRQ" Treble level "TRE" Balance "Balance" Fader "Fader" Sub woofer level*¹ "SW Level" Front High Pass Filter*² "HPF Front" Rear High Pass Filter*² "HPF Rear" Front/Rear High Pass Filter*³ Sub woofer Low Pass Filter*¹ Sub woofer phase*² "HPF" "LPF SW" "SW Phase" Volume offset Loudness "Volume Offset" "Loudness" -8 - +8 1.0/2.0 10.0/12.5/15.0/17.5 kHz -8 - +8 Left 15 - Right 15 Rear 15 - Front 15 -15 - +15 Through/40/60/80/100/ 120/150/180/220 Hz Through/40/60/80/100/ 120/150/180/220 Hz Through/100/125/170 Hz 50/80/120/Through Hz Normal (0°)/ Reverse (180°) -8 - ±0 ON/OFF • User memory: The values set on the 'Audio Control' (page 11). • Each setting value is changed with the 'Speaker Setting' (page 12). First, select the speaker type with the Speaker setting. Audio Control 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [AUD] button for at least 1 second. "Audio Control" is displayed. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed the items that can be adjusted switch as shown below. 4 Adjust the Audio item Press the [4] or [¢] button. Adjustment Item Display Bass Center Frequency*² "Bass FRQ" Bass level "Bass" Bass Q Factor*² "Bass Q" Bass Extend*² "Bass EXT" Middle Center Frequency*² "MID FRQ" Range 60/70/80/100 or 150 Hz -8 - +8 1.00/1.25/1.50/2.00 ON/OFF 0.5/1.0/1.5/2.0 kHz • According to the Bass Q Factor setting value, the frequencies that can be set in Bass Center Frequency change as shown below. Bass Q Factor 1.00/1.25/1.50 2.00 Bass Center Frequency 60/70/80/100 60/70/80/150 • When the Bass Extend is set to ON, low frequency response is extended by 20%. • Volume offset: Each source's volume can be set as a difference from the basic volume. • Loudness: Compensating for low and high tones during low volume. • *¹ You can control this item when 'Switching preout' (page 27) is set to "SWPRE Sub-W". (KDC-MP6025/ 625 only) • *² Function of the KDC-X679 • *³ Function of the KDC-MP6025/MP625 5 Exit Audio Control mode Press the [AUD] button. English | 11