Kenwood MP6025 Instruction Manual - Page 33

Connecting Wires to Terminals AUX right input (Red) (KDC-6025 only)/ Sub Woofer right output (Red) (KDC-X679 only) AUX left input (White) (KDC-6025 only)/ Sub Woofer left output (White) (KDC-X679 only) Rear left output (White) / Sub Woofer left output (White) (KDC-MP625/MP6025 only) Rear right output (Red) / Sub Woofer right output (Red) (KDC-MP625/MP6025 only) FM/AM antenna input KENWOOD disc changer input To connect the Disc changer, consult your Disc changer manual. Front left output (White) Front right output (Red) Fuse (10A) If no connections are made, do not let the wire come out from the tab. Wiring harness (Accessory1) When using the optional power amplifier, connect to its power control terminal. Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. Connect to the terminal that is grounded when either the telephone rings or during conversation. To "EXT.AMP.CONT." terminal of the amplifier having the external amp control function. To car light control switch Power control wire (Blue/White) P.CONT Motor antenna control wire (Blue) ANT. CONT TEL mute wire (Brown) TEL MUTE External amplifier control wire (Pink / Black) (KDC-X679 only) Dimmer control wire (Orange / White) White/Black To front left speaker White To front right speaker Gray/Black Gray To rear left speaker To rear right speaker Green/Black Green Purple/Black Purple Ignition key switch Car fuse box ACC FRONT • L FRONT • R REAR • L REAR • R Ignition wire (Red) Car fuse box (Main fuse) Battery + - Battery wire (Yellow) Ground wire (Black) - (To car chassis) English | 33