Kenwood MP6025 Instruction Manual - Page 16
Auxiliary Input Display Setting, Subwoofer Output, Faceplate Angle Adjustment
UPC - 019048151322
View all Kenwood MP6025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
General features Auxiliary Input Display Setting Selecting the display when this device is switched to Auxiliary input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX"/ "AUX EXT" display. 2 Enter Auxiliary input display setting mode Press the [DISP] button for at least 2 seconds. The presently selected AUX Name is blinks. 3 Select the Auxiliary input display Press the [4] or [¢] button. Each time the button is pressed it switches through the below displays. • "AUX"/ "AUX EXT" • "TV" • "VIDEO" • "GAME" • "PORTABLE" • "DVD" 4 Exit Auxiliary input display setting mode Press the [DISP] button. Faceplate Angle Adjustment Press the [ANG] button for at least 1 second. • Do not apply excessive force to the faceplate. It can cause damage. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. • When operation stops for 10 seconds, the name at that time is selected, and Auxiliary input display setting mode closes. • The Auxiliary Input Display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S210A is used. Subwoofer Output Turning the Subwoofer output ON or OFF. Press the [SW] button for at least 1 second. Each time the button is pressed Subwoofer output switches ON or OFF. When it's ON, "Sub-W ON" is displayed. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. • Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Align the shaft on the unit with the depression on the faceplate. • You can control this function when 'Switching preout' (page 27) is set to "SWPRE Sub-W". 16 | English