Kenwood MP6025 Instruction Manual - Page 38

Troubleshooting Guide Disc source ? "AUX EXT" is displayed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the 'About CD players/disc changers connected to this unit' (page 5) of the section on 'Safety precautions'. ? The specified disc does not play, but another one plays instead. ✔ The specified CD is quite dirty. ☞ Clean the CD. ✔ The disc is loaded in a different slot from that specified. ☞ Eject the disc magazine and check the number for the specified disc. ✔ The disc is severely scratched. ☞ Try another disc instead. ? A CD ejects as soon as it is loaded. ✔ The CD is quite dirty. ☞ Clean the CD, referring to the CD cleaning of the section on 'About CDs' (page 7). ? Can't remove disc. ✔ The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. ☞ The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. ? The disc won't insert. ✔ There's already another disc inserted. ☞ Press the [0] button and remove the disc. ? Direct Search can't be done. ✔ Another function is ON. ☞ Turn Random Play or other functions OFF. ? Track Search can't be done. ✔ For the discs/folders first or last song. ☞ For each disc/folder, Track Search can't be done in the backward direction for the first song or in the forward direction for the last song. MP3/WMA source ? Cannot play an MP3/WMA. ✔ The media is scratched or dirty. ☞ Clean the media, referring to the CD cleaning of the section on 'About CDs' (page 7). ? The sound skips when an MP3/WMA is being played. ✔ The media is scratched or dirty. ☞ Clean the media, referring to the CD cleaning of the section on 'About CDs' (page 7). ✔ The recording condition is bad. ☞ Record the media again or use another media. ? The MP3/WMA track time isn't displayed correctly. ✔ --- ☞ There are times when it isn't displayed correctly according to the MP3/WMA recording conditions. HD Radio source ? No sound can be heard, or the volume is low. ✔ The preset broadcast station is not transmitting in the mode that was set with 'Receive mode Setting' (page 29). ☞ Please set 'Receive mode Setting' to "Auto". ✔ In digital AM broadcasting, receive mode switches between stereo and monaural too often. ☞ Receiving condition is bad or unstable. Stereo is chosen when receiving condition is good, and it switches to monaural when the condition becomes bad. ✔ HD Radio tuner is connected to KCA-S210A or other units. ☞ Connect the HD Radio tuner directly to the control unit. If the following situations, consult your nearest service center: Even though the disc changer is connected, the Disc Changer source is not ON, with "AUX EXT" showing in the display during the Changer Mode. 38 | English