Kenwood TH-D74A User Manual - Page 95
STANDBY BEEP, REPEATER SCAN, REPEATER SCAN LOCKOUT, Group Lockout Setting, Individual Lockout Setting
View all Kenwood TH-D74A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
STANDBY BEEP This function is to notify with a beep sound that transmission has ended when a D-STAR signal is received. 1 Access Menu No. 645. ◆◆ If there is no more than one repeater registered in the repeater list, a repeater scan can not be performed. REPEATER SCAN LOCKOUT This function is to exclude and skip any repeater from the scan targets when D-STAR repeater lists are scanned. 2 Select [Off] or [On]. [Off]: Does not sound the standby beep. [On]: Sounds the standby beep. Note: ◆◆ The standby beep volume can be changed in Menu No. 915. ◆◆ When the reception sound is muted by the Callsign squelch/ Code squelch, the standby beep does not sound. REPEATER SCAN This function is to scan digital repeaters among the repeater list in DR mode. 1 Select [DR Scan] in the Digital Function Menu. DR Scan screen appears. Group Lockout Setting You can lock out all repeaters in a specific repeater group. 1 Access Menu No. 210. World region selection screen appears. 2 Select a World region and press [ENT]. Country region selection screen appears. 3 Select a Country region and press [ENT]. Group selection screen appears 4 Select a group to be skipped and press [A/B]. The lockout icon < >appears. 5 Press [PTT] to return to the frequency screen. 2 Select an item and press [A/B]. [FROM] and MHz dot flash and scan starts in the increasing direction of repeater numbers from the last repeater. The scan direction can be changed with [ ]/[ ] or [ENC] control. DR Scan Menu DR Scan Menu Operation Search for nearby repeaters (up to 20 Nearby Repeaters repeaters) that are near your station (within a range of 160 km (100 mi)) among D-STAR repeaters. World Region Search for the repeaters that are communicating among all D-STAR repeaters that belong to the World Region. Country Search for repeaters that are communicating among all D-STAR repeaters that belong to the Country. Group Search for repeaters that are communicating among all D-STAR repeaters that belong to the Group. 3 Press [ENT]. Scan stops. Note: ◆◆ Repeaters specified for Repeater Lockout can not be scanned. ◆◆ When scanning by [Nearby Repeaters], [Not Found] is displayed if there is no repeater that can be used within the range of 160 km (100 mi) from your station. ◆◆ [Nearby Repeaters] scan will not operate if GPS data is not received. ◆◆ Even if GPS is not positioning, the transceiver searches for nearby repeaters by the stored GPS data. Individual Lockout Setting You can lock out the specific repeaters in a repeater group. 1 Access Menu No. 210. World region selection screen appears. 2 Select a World region and press [ENT]. Country region selection screen appears. 3 Select a Country region and press [ENT]. Group selection screen appears 4 Select a group and press [ENT]. Repeater list selection screen appears. 5 Select a repeater and press [A/B]. The lockout icon < >appears. 6 Press [PTT] to return to the frequency screen. Note: ◆◆ [FROM] or [TO] setting screen of the transmission settings can be accessed even if repeaters are set to Repeater lockout. ◆◆ Even if repeaters set to Repeater lockout are registered to a memory channel, they will not be the memory channel lockout. 16-13