Kenwood VRS-6200 User Manual - Page 17
Preparing for playback, Continued to next
View all Kenwood VRS-6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Preparing for playback 6 Use the MULTI CONTROL button (or the MULTI CONTROL %/fi keys) to select the appropriate front speakers setting. 1 "FRNT LRG": Large front speakers are connected to the receiver. 2 "FRNT NML": Average size front speakers are connected to the receiver. ÷ When the subwoofer setting is "SUBW ON", front speakers setting is "FRNT LRG" and a stereo source is played, the low frequencies may be reproduced through the front speakers and no audio output from the subwoofer in certain listen modes. In this case, set the subwoofer re-mix setting in step $ to "REMIX ON" to output the low frequencies from the subwoofer. 7 Press the SETUP key to accept the setting. ÷ The center speaker setting indication "CNTR" appears. 8 Use the MULTI CONTROL button (or the MULTI CONTROL %/fi keys) to select the appropriate center speaker setting. 1 "CNTR LRG": * A large center speaker is connected to the receiver. 2 "CNTR NML": An average size center speaker is connected to the receiver. 3 "CNTR OFF" : When no center speaker is connected. * "CNTR LRG" cannot be selected when the front speakers have been set to "FRNT NML". 9 Press the SETUP key to accept the setting. ÷ The surround speaker setting indication "SURR" appears. 0 Use the MULTI CONTROL button (or the MULTI CONTROL %/fi keys) to select the appropriate surround speaker setting. 1 "SURR LRG": * Large surround speakers are connected to the receiver. 2 "SURR NML": Average size surround speakers are connected to the receiver. 3 "SURR OFF" : When no surround speakers are connected. * "SURR LRG" cannot be selected when the center speaker have been set to "CNTR NML" or "CNTR OFF". ÷ When "SURR OFF" is selected and the selection is established by pressing the SETUP in step ! below, the procedure jumps to step $. However, if the subwoofer setting is "SUBW OFF", you can complete the speaker setup and proceed to the speaker volume level adjustment in step 5. ! Press the SETUP key to accept the setting. ÷ The surround back speaker setting indication "BS" appears. @ Use the MULTI CONTROL button (or the MULTI CONTROL %/fi keys) to select appropriate surround back speaker setting. 1 "BS LRG":* Large surround back speaker is connected to the receiver. 2 "BS NML": Average size surround back speaker is connected to the receiver. 3 "BS OFF": When no surround speakers are connected. * "BS LRG" cannot be selected when the surround speaker have been set to "SURR NML". # Press the SETUP key to accept the setting. ÷ The subwoofer re-mix setting indication "SW RE-MIX" appears. $ Use the MULTI CONTROL button (or the MULTI CONTROL %/fi keys) to select the appropriate subwoofer re-mix setting. If "REMIX ON" is selected as the subwoofer re-mix setting, the low frequencies are enhanced by adding the low frequencies of other channels to the subwoofer channel or adding the low frequencies of the subwoofer to other channels depending on the speaker setup. 1 "REMIX ON": Subwoofer re-mix setting mode to the receiver is ON. 2 "REMIX OFF": Subwoofer re-mix setting mode to the receiver is OFF. ÷ If subwoofer is turned "SUBW OFF", subwoofer re-mix setting is not visible. % Press the SETUP key to accept the setting. Continued to next page 17 EN