Kenwood VRS-6200 User Manual - Page 33

Convenient functions Center Width mode (Only when the input signal is a 2-channel signal in the DOLBY PRO LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode) Center width adjustment allows you to enjoy an enhanced sound when listening to music through center image from only center speaker, or left and right speakers or various combinations adjustments. 1 Press the SOUND key repeatedly until the "CENTER WIDTH" indication appears. ÷ When the center speaker is switched OFF, "CENTER WIDTH" cannot be selected. 2 Use the MULTI CONTROL button (or the MULTI CONTROL %/fi keys) to adjust the left-center-right output. Center image will be heard from center speaker only. Center image will be heard from left and right speakers only. ÷ When in other position, center image from center speaker, left and right speakers can be heard simultaneously with various combinations. Midnight mode (DOLBY DIGITAL and DTS mode only) When watching movies at night , you might not be able to raise the volume as loud as normal. Midnight mode compresses the dynamic range of previously specified parts of the DOLBY DIGITAL or DTS sound track (like scenes with sudden increases in volume) to minimize the difference in volume between the specified and non-specified parts. This makes it easy to hear all of the sound track, even when listening at low volumes. 1 Press the SOUND key repeatedly until the "NIGHT" indication appears. ÷ This can be selected only if DVD, VIDEO or GAME (FRONT AUX) is selected as the source and the listen mode is set to "DOLBY DIGITAL" or "DTS". 2 Use the MULTI CONTROL button (or the MULTI CONTROL %/fi keys) to select the "NIGHT ON" or "NIGHT OFF" setting. 1 "NIGHT ON" 2 "NIGHT OFF" Display dimmer adjustment The dimmer function lets you select the brightness of the receiver's display. You might find this useful if you darken your room to watch movies or listen to music. 1 If you want to use the remote control unit, press the TUNER, VIDEO, AUX or GAME/F.AUX key on the remote to set it to the receiver control mode. 2 Each time you press the DIMMER key, the display's brightness changes among the three available settings. Select the brightness level you find most pleasing. 1 Bright 2 Medium 3 Dark Sleep timer The sleep timer function turns the receiver OFF (to the standby mode) automatically when the set timer period has elapsed. The sleep timer period can be set in 10-minute steps up to 90 minutes. Press the SLEEP key repeatedly until the desired period before turning the receiver OFF (standby mode) is displayed. ÷ Each press increments the sleep timer period by 10 minutes. 10 = 20 = 30 ..... 70 = 80 = 90 = Cancel = 10 = 20 = ... The sleep timer indicator lights up ÷ Pressing the SLEEP key after the sleep timer has started allows you to check the remaining time period. ÷ To cancel the sleep timer, turn the receiver OFF (standby mode) or press the SLEEP key repeatedly until the sleep timer indicator disappears. ÷ The adjustment item is displayed for approximately 20 seconds. ÷ Some DOLBY DIGITAL or DTS software may not be compatible with the Midnight mode. 33 EN