Kenwood VRS-6200 User Manual - Page 39

Specifications (Except for the U.S.A., Canada, Europe and Australia) AUDIO section Rated power output during STEREO operation 65 watts per channel minimum RMS, both channels driven, at 8 Ω from 20 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC) Rated power output during STEREO operation .......... 80 W + 80 W DIN/IEC (1 kHz, 0.7% T.H.D. at 8 Ω ) Effective power output during STEREO operation ...... 100 W + 100 W (1 kHz, 10% T.H.D. at 8 Ω) Effective power output during SURROUND operation FRONT 80 W + 80 W 1 kHz, 0.7% T.H.D. at 8 Ω one channel driven) FRONT 100 W + 100 W (1 kHz, 10% T.H.D. at 8 Ω one channel driven) CENTER 80 W (1 kHz, 0.7% T.H.D. at 8 Ω one channel driven) CENTER 100 W (1 kHz, 10% T.H.D. at 8 Ω one channel driven) SURROUND 80 W + 80 W (1 kHz, 0.7% T.H.D. at 8 Ω one channel driven) 100 W + 100 W (1 kHz, 10% T.H.D. at 8 Ω one channel driven) Total harmonic distortion 0.05% (1 kHz, 50 W, 8 Ω) Frequency response LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX 20 Hz ~ 90 kHz, +0 dB ~ -3.0 dB Signal to noise ratio (IHF' 66) LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX 96 dB Input sensitivity / impedance LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX 500 mV / 40 kΩ Output level / impedance REC OUT 500 mV / 1 kΩ PRE OUT (SURROUND BACK 700 mV / 2.2 kΩ PRE OUT (SUBWOOFER 1.5 V / 2.2 kΩ Tone control BASS 10 dB (at 100 Hz) TREBLE 10 dB (at 10 kHz) Loudness control VOLUME at -30dB level 8 dB (at 100 Hz) DIGITAL AUDIO section Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 96 kHz Input level / impedance / wave length Optical: VIDEO, GAME (or FRONT AUX 15 dBm ~ -21 dBm), 660 nm ±30 nm Coaxial: DVD 0.5 Vp-p / 75 Ω VIDEO section Input sensitivity / impedance Composite: DVD, VIDEO, GAME (or FRONT AUX 1 Vp-p / 75 Ω Output level / impedance Composite: VIDEO, MONITOR OUT 1 Vp-p / 75 Ω FM tuner section Tuning frequency range 87.5 MHz ~ 108 MHz Usable sensitivity (MONO) 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB) 50 dB quieting sensitivity STEREO 28 µV (75 Ω)/ 40.2 dBf (75 kHz dev) Total harmonic distortion (1 kHz) MONO 0.5% (71.2 dBf input) STEREO 0.7% (71.2 dBf input) Signal to noise ratio (1 kHz) MONO 75 dB (71.2 dBf input) STEREO 68 dB (71.2 dBf input) Selectivity (±400 kHz 70 dB Stereo separation (1 kHz 40 dB Frequency response (30 Hz ~ 15kHz 0.5 dB, -3.0 dB AM tuner section Tuning frequency range 10 kHz step 530 kHz ~ 1,610 kHz 9 kHz step 531 kHz ~ 1,602 kHz Usable sensitivity (30% mod, S/N 20 dB) ......... 16 µV / (600 µV/m) Signal to noise ratio (30% mod, 400 Hz) 50 dB (1 mV input) GENERAL Power consumption 150 W Standby power consumption 0.3 W Dimensions W: 440 mm (17-5/16") H : 079 mm (3-1/8") D : 357 mm (14-1/16") Weight (Net 7.9 kg (17.4 lb) Notes 1. KENWOOD follows a policy of continuous advancements in develop- ment. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature). 39 EN