Kenwood VRS-7100 Instruction Manual - Page 19
Preparing the remote control
UPC - 019048153548
View all Kenwood VRS-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Setting up the system Preparing the remote control Loading the batteries 1 Remove the cover. 2 Insert the batteries. 3 Close the cover. ¶ Insert two AA-size (R6) batteries as indicated by the polarity markings. Remote control operation When the STANDBY indicator is lit, the power turns ON when you press the POWER RCVR on the remote control. When the power comes ON, press the key you want to operate. Operating other component range Remote sensor POWER RCVR ¶ When pressing more than one remote control key successively, press the keys securely by leaving an interval of 1 second or more between keys. Notes 1. The supplied batteries may have shorter lives than ordinary batteries due to use during operation checks. 2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones. 3. Placing the remote sensor in direct sunlight, or in direct light from a high frequency fluorescent lamp may cause a malfunction. In such a case, change the location of the system installation to prevent malfunction. 19 EN