KitchenAid KG25H0XAQ Use and Care Guide - Page 15
Assembling Your Bowl, Stand Mixer
View all KitchenAid KG25H0XAQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ASSEMBLING YOUR BOWL-LIFT STAND MIXER Pre-Use Cleaning 4. Place bowl brackets over the Before using your stand mixer for the first time, wash the mixing bowl and accessories. See the "Care and Cleaning" section. locating pins on the bowl support. 5. Press down on the back of the bowl until bowl pin snaps into the spring latch. 6. Raise the bowl before mixing. Attaching Mixing Bowl 7. Plug into a grounded 3-prong outlet. WARNING Raising and Lowering Mixing Bowl 1. To raise the bowl, turn the bowl-lift lever counterclockwise as far as possible. ENGLISH Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Raise 1. Make sure the speed control lever is set to the OFF/0 position. 2. Unplug the stand mixer or disconnect power. 3. Lower the bowl support by turning the bowl-lift lever clockwise. Lower 2. The bowl-lift lever will snap into place when the bowl is completely raised. 3. To lower the bowl, turn the bowllift lever clockwise. Removing Mixing Bowl 1. Make sure the speed control lever is set to the OFF/0 position. 2. Unplug the stand mixer or disconnect power. 3. Lower the bowl support by turning the bowl-lift lever clockwise. 4. Grasp the bowl handle and lift the bowl off of the locating pins. 15 Continued on next page