KitchenAid KG25H0XAQ Use and Care Guide - Page 19
Lift Stand Mixer Use
View all KitchenAid KG25H0XAQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ENGLISH BOWL-LIFT STAND MIXER USE Operating the Mixer 1. Before use, make sure the flat beater, wire whip, or the PowerKnead™ Spiral Dough Hook is properly attached and the bowl is raised into mixing position. 2. Plug the stand mixer into a grounded 3-prong outlet. 3. Slowly slide the speed control lever forward to begin mixing. Gradually increase the speed to avoid splashing ingredients. 4. To stop mixing, slide the speed control lever to the OFF/0 position. WARNING Injury Hazard Unplug mixer before touching beaters. Failure to do so can result in broken bones, cuts or bruises. NOTE: The bowl and beater are designed to provide thorough mixing without frequent scraping. Scraping the bowl once or twice during mixing is usually sufficient. Turn off the stand mixer before scraping. Do not scrape the bowl while the stand mixer is operating. Commercial Style Motor Protection If the stand mixer becomes overheated due to heavy use, the motor will automatically shut off to avoid damage. If this occurs: 1. Slide the speed control lever to the OFF/0 position. This resets the mixer. 2. Allow the mixer to cool for several minutes. 3. Resume mixing by sliding the speed control lever to the desired speed. 4. If the mixer does not start, slide the speed control lever to the OFF/0 position. Let the mixer cool for 30 more minutes before resuming. 19