Kodak C530 User Manual - Page 45

For best pictures, see,

Page 45 highlights

Troubleshooting If... Try one or more the following In Review mode, a I Transfer the picture to the computer (page 15). blue or black screen is displayed instead of a picture. Shutter button does not work. I Turn on the camera (page 2). I Wait until the ready light stops blinking red before attempting to take another picture. I Transfer pictures to the computer (page 15), delete pictures from the camera (page 13), switch image storage locations (page 26), or insert a card with available memory (page 4). I For best pictures, see page 5. Slide show does I Adjust the camera Video Out setting (NTSC or PAL, page 28). not run on external I See the external device's user's guide. video device. Picture is too light. I Move so there is at least 3.3 ft (1.0 m) between camera and subject. I Decrease Exposure Compensation (page 25). Picture is not clear. I Clean the lens (page 55). I Move so there is at least 3.3 ft (1.0 m) between the camera and the subject. I Place the camera on a flat, steady surface or use a tripod. Picture is too dark. I Turn on the flash (page 8). I Move so there is no more than 7.9 ft (2.4 m) between the camera and the subject. I Use Fill flash (page 24) or change your position so light is not behind the subject. I Increase Exposure Compensation (page 25). www.kodak.com/go/support 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71

Troubleshooting
www.kodak.com/go/support
39
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
Transfer the picture to the computer (
page 15
).
Shutter button
does not work.
Turn on the camera (
page 2
).
Wait until the ready light stops blinking red before attempting to take
another picture.
Transfer pictures to the computer (
page 15
), delete pictures from the
camera (
page 13
), switch image storage locations (
page 26
), or
insert a card with available memory (
page 4
).
For best pictures, see
page 5
.
Slide show does
not run on external
video device.
Adjust the camera Video Out setting (NTSC or PAL,
page 28
).
See the external device’s user’s guide.
Picture is too light.
Move so there is at least 3.3 ft (1.0 m) between camera and subject.
Decrease Exposure Compensation (
page 25
).
Picture is not clear.
Clean the lens (
page 55
).
Move so there is at least 3.3 ft (1.0 m) between the camera and the
subject.
Place the camera on a flat, steady surface or use a tripod.
Picture is too dark.
Turn on the flash (
page 8
).
Move so there is no more than 7.9 ft (2.4 m) between the camera and
the subject.
Use Fill flash (
page 24
) or change your position so light is not behind
the subject.
Increase Exposure Compensation (
page 25
).
If...
Try one or more the following