Kodak ESP 7 User Guide - Page 49
Print Photos Options, Start, View Photos, menu. A sample of the menu is shown in
View all Kodak ESP 7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
KODAK ESP 7 All-in-One Printer 1. Connect a digital camera or portable USB drive to the front panel USB port, or insert a memory card to the appropriate card reader on the front panel. The printer displays the photos on the LCD screen, last photo first. 2. Load the paper tray with photo paper, print side down. 3. On the control panel, press or until a photo you want to print is displayed on the LCD screen. 4. Press OK to select the photo. A check mark displays on the LCD screen to indicate your action. If you change your mind and want to de-select the photo from printing, press OK again; the check mark is removed. Tip: To select and print all the photos on a memory card or portable USB device which have not yet been selected, hold down the OK button for 2 seconds. Holding down the OK button again for 2 seconds de-selects all the photos. 5. If you are satisfied with the image shown, you can modify the quantity of copies to be printed by pressing until the number you want is shown on the LCD. To decrease any quantity greater than 1 shown, press until the number you want displays. 6. If you want to specify different print parameters for the photo, press Menu to display the Print Photos Options menu. A sample of the menu is shown in the illustration below. 7. Here you can press until the parameter you want to adjust is selected. If a value is displayed between the and symbols in the row, press or to select the value you want. 8. Press Start to print the selected photo, or press until View Photos is selected. 9. Press or until you view another photo you want to print. 10. Repeat this process as needed. NOTE: Each photo is automatically deselected after it has been printed. www.kodak.com/go/aiosupport 41