Kodak ESP 7 User Guide - Page 89
Network troubleshooting, Computer unable to detect the All-in-One printer
View all Kodak ESP 7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
KODAK ESP 7 All-in-One Printer Network troubleshooting Wired network troubleshooting Computer unable to detect the All-in-One printer Probable Cause 1 Cables are not connected properly. Corrective Action Check the following cables to ensure they are properly connected. • Cables between the hub or router and your computer • Cables between the All-in-One printer and the hub or router • Cables to and from your modem or printer Internet connection (if applicable) Probable Cause 2 Your Local Area Network card (LAN card) is not set up properly. Corrective Action Verify the setup of your LAN card. To check your LAN card (Windows) 1. Open the Control Panel. 2. Double-click System. 3. In the System Properties dialog box, click the Hardware tab. 4. Click Device Manager. 5. Make sure your card shows up under Network Adapters. 6. Refer to the documentation that came with your card. To check your LAN card (Macintosh) 1. Click the Apple icon on the Menu bar. 2. Select About This Mac and then click More Info. The System Profiler is displayed. 3. In the System Profiler, click Network. 4. Make sure your LAN card appears in the list. Probable Cause 3 You do not have an active network connection. Corrective Action Check to see if you have an active network connection. www.kodak.com/go/aiosupport 81