Kodak I1420 User Guide - Page 35
Cleaning the separator module, damage, replace the tires or the separator module. See - rollers
UPC - 041778272671
View all Kodak I1420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Cleaning the separator module 1. Push up on the scanner cover release latch and open the scanner cover. 2. Lift the separator module up and out of position. 3. Manually rotate and wipe the separator module tires with a roller cleaning pad. 4. Inspect the tires. If the separator module tires show signs of wear or damage, replace the tires or the separator module. See the section entitled, "Replacing the separator module and separator module tires" later in this chapter. 5. Insert the separator module and align the shaft ends. 6. Press until the separator module clicks into place. 5-4 A-61550 February 2010
5-4
A-61550
February 2010
Cleaning the
separator module
1.
Push up on the scanner cover release latch and open the scanner
cover.
2.
Lift the separator module up and out of position.
3.
Manually rotate and wipe the separator module tires with a roller
cleaning pad.
4.
Inspect the tires. If the separator module tires show signs of wear or
damage, replace the tires or the separator module. See the section
entitled, “Replacing the separator module and separator module
tires” later in this chapter.
5.
Insert the separator module and align the shaft ends.
6.
Press until the separator module clicks into place.