Kodak I1420 User Guide - Page 47
Dry both sides of the new lower imaging guide with an almost dry
UPC - 041778272671
View all Kodak I1420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Replacing the lower imaging guide (for all scanner models) 1. Locate the lower imaging guide. 2. Using a Phillips Head screwdriver, loosen the screw from the lower imaging guide. 3. Slide the imaging guide out of the bracket and remove it from the scanner. 5-16 4. Discard the used imaging guide. 5. Remove any dust or debris from the guide track. Do not allow debris to fall into the scanner. 6. Wipe both sides of the new lower imaging guide with a fresh Staticide Wipe. 7. Dry both sides of the new lower imaging guide with an almost dry Staticide Wipe. 8. Align the new lower imaging guide in the guide track and slowly push it in. 9. Realign the lower imaging guide bracket and tighten the screw. 10. Close the scanner cover with both hands; push it down firmly until it latches into place. A-61550 February 2010