Kodak I1420 User Guide - Page 44
Replacing the pre-separation pad, Push the pre-separation pad firmly in the slots until the pre
UPC - 041778272671
View all Kodak I1420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Replacing the preseparation pad 1. Remove the separator module as previously directed. 2. Locate the pre-separation pad on the separator module. 3. Hold the separator module in both hands and find the two preseparation pad side tabs which protrude slightly from the back of the separator module. 4. Push on the pre-separation pad side tabs on the back until the preseparation pad protrudes slightly from the front of the separator module. 5. Grasp the pre-separation pad and pull it out of the separator module. 6. Discard the worn pre-separation pad. 7. Align the side tabs of a new pre-separation pad with the slots on the separator module. 8. Push the pre-separation pad firmly in the slots until the preseparation pad flap rests lightly against the separator module tires. 9. Reinstall the separator module. 10. Close the scanner cover with both hands; push it down firmly until it latches into place. A-61550 February 2010 5-13