Konica Minolta A0HF012 User Manual - Page 173

Replacing All Toner Cartridges at the Same Time Note Be careful not to spill toner while replacing a toner cartridge. If toner spills, immediately wipe it off with a soft, dry cloth. By selecting the EJECT MODE in the PRINTER MODE menu, all toner cartridges can be replaced at the same time. Follow the procedure described below to use the EJECT MODE. 1 With the main screen displayed, press the * key to display the PRINTER MODE screen. 2 Press the , key to select T/C CHANGE and then press the Select key. 3 Press the , key to select EJECT MODE and then press the Select key. 4 Perform the operations described in steps 6 through 15 of "Replacing a Toner Cartridge" on page 7-5 through 7-9 to replace the magenta toner cartridge. " To exit EJECT MODE, press the Stop/Reset key. 5 Follow the same procedure to replace the cartridges for the cyan, black, then yellow toners. 6 Press the Stop/Reset key to reset the machine. " The machine must complete a calibration cycle (less than 2 min- utes) after a toner cartridge has been replaced. If you open the scanner unit or front cover before the machine is reset, the calibration stops, then starts over again after the cover is closed. 7-10 Replacing Consumables