Konica Minolta A0HF012 User Manual - Page 245
Machine Setting/cali, Bration, Utility, Machine Setting Menu
![]() |
View all Konica Minolta A0HF012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 245 highlights
Symptom Cause Solution Colors are The scanner unit or Set MACHINE SETTING/CALI- not register- front cover is opened BRATION in the UTILITY menu to ing properly; during the calibration. ON, and then perform the AIDC color colors are mixed or Gradations are not adjusted correctly. calibration. For details, refer to "MACHINE SETTING Menu" on have page 2-22. page-to-pag e variation. The imaging car- Remove the imaging cartridge and tridges is not correctly check for damage. If it is damaged, seated. replace it. One or more of the Remove the toner cartridges and toner cartridges may check for damage. If it is damaged, be defective. replace it. The media is moist Remove the moist media and replace it from humidity. with new, dry media. The color The imaging cartridge Remove the imaging cartridge and has a poor may be defective. check for damage. If it is damaged, reproduction replace it. or has poor color density. If the problem is not resolved, even after all of the above have been performed, contact Technical Support with the error information. For contact information, refer to the Need Assistance sheet. 9-36 Solving Problems with Printing Quality
![](/manual_guide/products/konica-minolta-a0hf012-user-manual-b754f74/245.png)