Konica Minolta A0HF012 User Manual - Page 236
Wrong Toner X, Install a correct KONICA MINOLTA
View all Konica Minolta A0HF012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Symptom Cause Solution Printing takes too much time. The machine is set to It takes more time to print with special a slow printing mode media. When using regular paper, (for example, thick make sure that the media type is set stock). properly in the driver. The machine is set to It takes time for printing to start in power saving mode. power saving mode. The job is very com- Wait. No action needed. plex. A toner cartridge for a Install a correct KONICA MINOLTA different region or an toner cartridge approved for your speunapproved toner cific machine. cartridge is installed (Wrong Toner X is displayed in the message window). If an error has been Wait. No action needed. detected during printing job transmission in the Copy mode, it takes a while to process the error and resume the printing operation. Blank pages One or more of the are printed. toner cartridges are defective or empty. Check the toner cartridges. The image will not print correctly or not at all, if the cartridges are empty. The wrong media is being used. Check that the media type set in the driver matches the media loaded in the machine. Not all pages A different user acci- Try printing the remaining pages. print. dentally canceled the job. The tray is empty. Check that the tray is loaded with media, in place, and secure. A document is printed Print the overlay file using a suitable with an overlay file printer driver. which has been created by an unsuitable printer driver. Solving Other Problems 9-27