Konica Minolta A0HF012 User Manual - Page 42
Toner Remaining, T/c Change, Replace Mode, Eject Mode
![]() |
View all Konica Minolta A0HF012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
TONER REMAINING A general estimate of the amount of toner remaining in the toner cartridges can be viewed. " If the Select key is held down for at least 2 seconds while the screen described above is displayed, the configuration page will be printed. T/C CHANGE REPLACE MODE EJECT MODE Switches the machine to the REPLACE MODE. This mode is used when replacing a toner cartridge. For details on replacing a toner cartridge, refer to "Replacing a Toner Cartridge" on page 7-5. " To return to normal operation mode from REPLACE MODE, press the Stop/Reset key. Switches the machine to the EJECT MODE. This mode is used when replacing all toner cartridges at the same time. For details on replacing all toner cartridges, refer to "Replacing All Toner Cartridges at the Same Time" on page 7-10. " To return to normal operation mode from EJECT MODE, press the Stop/Reset key. Checking the Machine Status and Settings 2-15
![](/manual_guide/products/konica-minolta-a0hf012-user-manual-b754f74/42.png)