Konica Minolta A0HF012 User Manual - Page 243
dirty with toner., The media path is
![]() |
View all Konica Minolta A0HF012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 243 highlights
Symptom Cause There is The media is moist insufficient from humidity. fusing or the Unsupported media image (wrong size, thick- comes off ness, type, etc.) is when being used. rubbed. Media type is set incorrectly. Solution Remove the moist media and replace it with new, dry media. Use KONICA MINOLTA-approved media. See "Print Media" on page 3-2. Also, refer to http://printer. konicaminolta.com for a complete list of currently approved media. When printing envelopes, labels, letterhead, postcards or thick stock, specify the appropriate media type in the printer driver. There are toner smudges or residual images. One or more of the toner cartridges are defective or installed incorrectly. Remove the toner cartridges and check for damage. If it is damaged, replace it. There are The media path is Print several blank sheets and the toner dirty with toner. excess toner should disappear. smudges on One or more of the Remove the toner cartridges and the back side toner cartridges are check for damage. If it is damaged, of the page defective. replace it. (whether or not it has The imaging cartridge Remove the imaging cartridge and been may be defective. check for damage. If it is damaged, duplexed). replace it. 9-34 Solving Problems with Printing Quality
![](/manual_guide/products/konica-minolta-a0hf012-user-manual-b754f74/243.png)