Konica Minolta C300i AU-211P User Guide for bizhub C360i and C4050i Series - Page 22
Setting Up LDAP]
View all Konica Minolta C300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
3.3 Address Search (LDAP) Using PKI card 3 [Setting Up LDAP] Register the LDAP server used to search for a destination. Select [Utility] - [Administrator] - [Network] - [LDAP Setting] - [LDAP Setting] - Select any list in the server list. - [Edit], and configure the following settings. Item [LDAP Server Name] [Server Address] [Port No.] [Enable SSL] [Certificate Verification Level Settings] [Search Base] [Timeout] [Max.Search Results] [General Settings] [Use Referral] [Search Condition Attributes] [Search] [Initial Setting for Search Details] Description Enter the name of the LDAP server (using up to 32 characters). Enter the LDAP server address. When specifying the host name instead of the address, select the [Please check to enter host name.] check box. If necessary, change the LDAP server port number (default: [389]). When using SSL communications, set this option to ON (default: OFF). • [Port No.(SSL)]: Change the port number for SSL communication as needed (default: [636]). To verify the certificate for SSL communication, select items to be verified. • [Expiration Date]: Confirm whether the certificate is within the validity period (default: ON). • [CN]: Confirm whether CN (Common Name) of the certificate matches the server address (default: OFF). • [Key Usage]: Confirm whether the certificate is used according to the intended purpose approved by the certificate issuer (default: OFF). • [Chain]: Confirm whether there is a problem in the certificate chain (certificate path) (default: OFF). The chain is validated by referencing the external certificates managed on the MFP. • [Expiration Date Confirmation]: Confirm whether the certificate has expired (default: OFF). The expiration date confirmation is performed in the order of OCSP (Online Certificate Status Protocol) service, and CRL (Certificate Revocation List). Specify the starting point to search for a destination (using up to 255 characters). The range from the entered starting point, including the following tree structure, is searched. If necessary, change the time-out time to limit a communication with the LDAP server (default: [60] sec.). Change the maximum number of destinations to be displayed as search results, if necessary (default: [100] destinations). Select the authentication method to log in to the LDAP server depending on your environment (default: [anonymous]). • [Domain Name]: If [GSS-SPNEGO] is selected for [General Settings], enter the domain name of Active Directory (using up to 64 characters). Select whether to use the referral function (default: [ON]). Select attributes to be specified when performing the LDAP search (default: [Name]). The setting can be switched between [Name] (cn) and [Nickname] (displayName). Select whether to display candidate destinations when entering a part of the name to perform LDAP search (default: [OFF]). Specify the default LDAP search conditions for each item (default: [OR]). • [Search Attributes Authentication]: This setting is not available. [Search Attribute]: This setting is not available. AU-211P 3-6