Konica Minolta HP PageWide XL 4000 MFP User Guide - Page 67
Maintenance cartridge part number, Replace the maintenance cartridge, Ready, Missing, Almost, Finished
View all Konica Minolta HP PageWide XL 4000 MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
The printer will refuse to start a print job if it detects the end of the cleaning roll. You should then replace the maintenance cartridge with a new one. TIP: You are recommended to wear gloves when replacing the maintenance cartridge. Maintenance cartridge status ● Ready ● Missing ● Almost finished ● Finished Maintenance cartridge part number The HP 841 maintenance cartridge has the part number F9J48A. Replace the maintenance cartridge IMPORTANT: Be ready with the new maintenance cartridge before starting the replacement. Once the cartridge is moved to the replacement position, you have 40 seconds to change it. If you exceed that limit, the maintenance cartridge is automatically moved back so that the printheads do not become dry. If the front panel shows an error, close the service door. 1. Remove the packaging from the new maintenance cartridge. 2. Start the replacement from the front panel. 3. When prompted by the front panel, open the maintenance cartridge door. IMPORTANT: When removing a maintenance cartridge, remember that it contains ink. Therefore, wear gloves and hold the cartridge by the handle. ENWW Maintenance cartridge 61