Konica Minolta Kodak Ngenuity 9090DB User Guide - Page 28

4 Advanced Features Contents Accessing Advanced features 4-2 Advanced features 4-3 Color screen 4-4 Piking Rectangle screen 4-5 Rotation screen 4-6 Document Setup screen 4-7 Advanced Color screen 4-9 Multifeed screen 4-10 About screen 4-12 This chapter provides information about advanced features that can be used with Kodak Ngenuity 9000 Series Scanners. The controls for operating the Advanced Features are accessible within the VirtualReScan® (VRS) Interactive Viewer. NOTE: When VRS is not installed, similar settings can be found in the Direct ISIS and TWAIN settings. The features on the Advanced Properties dialog box can be used to control scanner-specific features that are not accessible through the Kofax VRS or scanning application screens. The general rule for VRS integrations is that if there is a control for a feature in both VRS and in the Advanced Properties dialog box, then the VRS control's setting will override the setting in the Advanced Properties dialog box. For example, if you have health forms where you need to drop out a form color or if you have documents with labels that cause false multifeed alarms, etc., you can change the scanner's settings on the Advanced Properties dialog box to enable Multifeed detection or electronic color dropout scanner features. These settings can be saved as part of a profile. Any settings made on the Advanced Settings screen will override the same settings defined in a saved profile. For more information on scanning with VRS Test Application and Profiles, see the Kofax VRS 4.5 (or newer) User's Guide. NOTE: Any settings made in the Advanced Properties dialog box must be saved in a profile or they will be lost when the application is closed. Some of the settings that can be made using the Advanced Properties dialog box include: color dropout, multifeed, rotation, document setup (i.e. allowing for large skew, etc.) A-61662 April 2010 4-1