Konica Minolta PS7000 PS7000 Operator Manual (PC Version) - Page 114
Troubleshooting warning messages, Warning message, Possible cause, Action
View all Konica Minolta PS7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
6-2 Troubleshooting warning messages Warning message Bind Size is Too High Press Down Book Table Bind Size is Not Detected Reset Book or Change Sheet Book Exp. level is Too High Set AE to off Book Size is Not Detected Reset Book or Change Sheet Possible cause Action • The height of the surface of the original is more than 65 mm above the book table. • Lower the original so that its surface is within the range 65 mm above the book table. • Select Sheet mode. • The steel mirror is dirty. • Clean the steel mirror. • Light from the room lighting or the outside through windows reflects on the steel mirror. • Relocate the Scanner to a place where light from the room lighting or the outside through windows does not reflect on the steel mirror. • Change settings appropriately for the original, referring to "Notes on originals". • A tag or bookmark is attached • Take off tags and bookmarks. to the original. • Set the original upside down. • Indices are provided on the top of the original. • Set the original upside down. • Set the distance between the stopper and the original in Book mode. • Select Sheet mode. • The steel mirror is dirty. • Clean the steel mirror. • The hardcover has patterns. • Light reflects on the hardcover. • When the mode is Book mode, set the distance between the stopper and the original. • Change settings appropriately for the original, referring to "Notes on originals". • The density of the original surface is too high. • Cancel the setting for auto exposure. • Turn off Frame Masking. • Select Sheet mode. • The original is not correctly set. • No original is set. • Change settings appropriately for the original, referring to "Notes on originals". • Set the original correctly. • A tag or bookmark is attached • Take off tags and bookmarks. to the original. • Indices are provided on the top of the original. • Select the Sheet mode and cancel the Auto function. • Set the original upside down. Troubleshooting Chapter 6