Konica Minolta PS7000 PS7000 Operator Manual (PC Version) - Page 35

3-1 Installation The PS7000 Twain Driver (hereinafter referred to as the Driver) must be installed on the personal computer connected to the Scanner to read images from it. This chapter describes the system requirements of the personal computer and the installation procedures of the Driver. Moreover, please read the Readme.txt file in the floppy disk of Twain Driver. System environment The following are the minimum system requirements for the computer connected to the Scanner to install the Driver. PS7000 Twain Driver Chapter 3 Computer OS Required memory Application software Recommended SCSI Host Adapter Compatible with IBM PC/AT WindowsNT4.0, Windows95, Windows98 Grayscale Scan: Max. 68 MB or less for the Twain driver only Binary Scan: Max. 10MB or less for the Twain driver only (additional memory required for the OS and other applications) Application software compatible with Twain32 (32-bit application compatible with Windows95/98/NT) SCSI Host Adapter manufactured by Adaptec (AHA-2940Ultra, 2940AU, 2930U) The operator should be completely familiar with basic Windows operations. NOTE Before installing PS7000 Twain Driver, install Adaptec Aspi Ver. 4.6 or advanced in your PC. If Adaptec Aspi is older than Ver. 4.6, PS7000Twain driver will not work. Adaptec Aspi is not supplied together with the product. Obtain the [Windows 95/98/NT 4.0 ASPI32.EXE] file from [update of Windows 95/98/NT 4.0 mini-port driver ASPI layer] available in the Adaptec's home page.