Konica Minolta bizhub 4422 bizhub 4422 User Guide - Page 205

Adjusting scanner registration, Contacting customer support

Page 205 highlights

Troubleshooting 205 Adjusting scanner registration 1 From the control panel, navigate to: Settings > Device > Maintenance > Config Menu > Scanner Configuration > Scanner Manual Registration 2 In the Print Quick Test menu, touch Start. 3 Place the Print Quick Test page on the scanner glass, and then touch Flatbed Registration. 4 In the Copy Quick Test menu, touch Start. 5 Compare the Copy Quick Test page with the original document. Note: If the margins of the test page are different from the original document, then adjust Left Margin and Top Margin. 6 Repeat step 4 and step 5 until the margins of the Copy Quick Test page closely match the original document. Adjusting ADF registration 1 From the control panel, navigate to: Settings > Device > Maintenance > Config Menu > Scanner Configuration > Scanner Manual Registration 2 In the Print Quick Test menu, touch Start. 3 Place the Print Quick Test page on the ADF tray. 4 Touch Front ADF Registration or Rear ADF Registration. Notes: • To align Front ADF Registration, place the test page faceup, short edge first into the ADF. • To align Rear ADF Registration, place the test page facedown, short edge first into the ADF. 5 In the Copy Quick Test menu, touch Start. 6 Compare the Copy Quick Test page with the original document. Note: If the margins of the test page are different from the original document, then adjust Horizontal Adjust and Top Margin. 7 Repeat step 5 and step 6 until the margins of the Copy Quick Test page closely match the original document. Contacting customer support Before contacting customer support, make sure to have the following information: • Printer problem • Error message • Printer model type and serial number Visit the place where you purchased your printer.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227

Adjusting scanner registration
1
From the control panel, navigate to:
Settings
>
Device
>
Maintenance
>
Config Menu
>
Scanner Configuration
>
Scanner Manual Registration
2
In the Print Quick Test menu, touch
Start
.
3
Place the Print Quick Test page on the scanner glass, and then touch
Flatbed Registration
.
4
In the Copy Quick Test menu, touch
Start
.
5
Compare the Copy Quick Test page with the original document.
Note:
If the margins of the test page are different from the original document, then adjust Left Margin and
Top Margin.
6
Repeat
step 4
and
step 5
until the margins of the Copy Quick Test page closely match the original document.
Adjusting ADF registration
1
From the control panel, navigate to:
Settings
>
Device
>
Maintenance
>
Config Menu
>
Scanner Configuration
>
Scanner Manual Registration
2
In the Print Quick Test menu, touch
Start
.
3
Place the Print Quick Test page on the ADF tray.
4
Touch
Front ADF Registration
or
Rear ADF Registration
.
Notes:
To align Front ADF Registration, place the test page faceup, short edge first into the ADF.
To align Rear ADF Registration, place the test page facedown, short edge first into the ADF.
5
In the Copy Quick Test menu, touch
Start
.
6
Compare the Copy Quick Test page with the original document.
Note:
If the margins of the test page are different from the original document, then adjust Horizontal
Adjust and Top Margin.
7
Repeat
step 5
and
step 6
until the margins of the Copy Quick Test page closely match the original document.
Contacting customer support
Before contacting customer support, make sure to have the following information:
Printer problem
Error message
Printer model type and serial number
Visit the place where you purchased your printer.
Troubleshooting
205