Konica Minolta bizhub 4422 bizhub 4422 User Guide - Page 62
Out of Service Erase, Scanner Configuration
View all Konica Minolta bizhub 4422 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Understanding the printer menus 62 Menu item Description Scanner Configuration Scanner Manual Registration Front ADF Registration Rear ADF Registration Flatbed Registration Manually register the flatbed and ADF after replacing the ADF, scanner glass, or controller board. Scanner Configuration Edge Erase ADF Edge Erase 0-6 (3*) Flatbed Edge Erase 0-6 (3*) Set the size, in millimeters, of the no‑print area around an ADF or flatbed scan job. Scanner Configuration Disable Scanner Enabled* Disabled ADF Disabled Disable the scanner if it is not working properly. Scanner Configuration Scanner Manual Registration Print Quick Test Print a test page that shows the scanner margin settings. Scanner Configuration Tiff Byte Order CPU Endianness* Little Endian Big Endian Determine the byte order of a TIFF‑formatted scan output. Scanner Configuration Exact Tiff Rows Per Strip On* Off Set the RowsPerStrip tag value of a TIFF‑formatted scan output. Note: An asterisk (*) next to a value indicates the factory default setting. Out of Service Erase Menu item Out of Service Erase Memory Last Sanitized Hard Disk Last Sanitized Out of Service Erase Sanitize all information on nonvolatile memory Sanitize all information on hard disk Erase all printer and network settings Description Show information on when the printer memory or hard disk was last sanitized. Note: Hard Disk Last Sanitized appears only in printers with a hard disk installed. Clear all settings and applications that are stored in the printer memory or hard disk. Note: Sanitize all information on hard disk appears only in printers with a hard disk installed.