Konica Minolta magicolor 4695MF magicolor 4695MF Facsimile User Guide - Page 61
Sending a Fax Manually Using the On Hook Key, Start, On hook
View all Konica Minolta magicolor 4695MF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
4 Specify the fax number of the recipient by using the telephone to dial the fax number. " The fax number of the recipient can also specified using the keypad in the control panel of this machine. " If Pulse is selected as the telephone line type, press the key to tem- porarily change the line type to Tone. 5 After finishing talking on the phone, the recipient should press the neces- sary key to start receiving the fax. Once the recipient's fax machine is ready, a beep is sounded. 6 Press the Start key to begin scanning and sending the fax. 7 Replace the handset to its cradle. " To stop the transmission, press the Stop/Reset key. A message appears, requesting confirmation to cancel the setting. Select YES, and then press the Select key. Sending a Fax Manually Using the On Hook Key " Manual transmission cannot be used together with duplex (dou- ble-sided) document transmission. 1 Load the document into the ADF. " When sending a fax manually, load the document into the ADF. An error will occur if the document is placed on the original glass. " For details on loading the document into the ADF, refer to "Sending a Fax Using the ADF" on page 38. 2 If desired, adjust the image quality. " The document image quality can be adjusted. For details, refer to "Adjusting the Image Quality" on page 42. 3 Press the On hook key. 4 Specify the fax number of the recipient. " The keys for registered destinations can be used even if the On hook key has been pressed. For details, refer to "Specifying a Recipient" on page 43. (Group dial destinations cannot be specified.) " If Pulse is selected as the telephone line type, press the key to tem- porarily change the line type to Tone. Sending a Fax Manually 55