Konica Minolta magicolor 5670EN magicolor 5650/5670 User Manual - Page 126

Envelopes Print on the front (address) side only. Some parts of the envelope consist of three layers of paper-the front, back, and flap. Anything printed in these layered regions may be lost or faded. Capacity Tray 1 (Manual Feed Tray) Tray 2 Up to 10 envelopes, depending on their thickness 500 sheet tray: Not supported 250 sheet tray: Up to 10 sheets, depending on the paper weight. Tray 3/4 Not supported Orientation Tray 1 Face down (Manual Feed Tray) Tray 2 Face up Driver Envelope Media Type Weight 91-163 g/m² (25-43 lb bond) Duplexing Not supported Glossy Mode Not supported Use envelopes that are „ Common office envelopes approved for laser printing with diagonal joints, sharp folds and edges, and ordinary gummed flaps " Because the envelopes pass through heated rollers, the gummed area on the flaps may seal. Using envelopes with emulsion-based glue avoids this problem. „ Approved for laser printing „ Dry DO NOT use envelopes that have „ Sticky flaps „ Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal- ing „ Transparent windows „ Too rough of a surface „ Material that will melt, vaporize, offset, discolor, or emit dangerous fumes „ Been presealed 112 Media Types