Konica Minolta magicolor 5670EN magicolor 5650/5670 User Manual - Page 130

Transparencies " Do not fan transparencies before loading them. Resulting static elec- tricity may cause printing errors. " If you touch the face of the transparencies with your bare hands, print quality may be affected. " Keep the printer path clean. Transparencies are especially sensitive to a dirty media path. If there are shadows on either the top or the bottom of the sheets, see chapter 9, "Maintaining the Printer" . " Remove transparencies as soon as possible from the output tray to avoid static buildup. You can print continuously with transparencies. However, this could affect the media feed, depending on the media quality, static buildup, and printing environment. Try printing your data on a sheet of plain paper first to check placement. " If you have problems feeding 20 sheets, try loading only 1-10 sheets at a time. Loading a large number of transparencies at one time may cause static buildup, thus causing feeding problems. Capacity Tray 1 (Manual Feed Tray) Tray 2 Up to 20 transparencies, depending on their thickness 500 sheet tray: Not supported 250 sheet tray: Up to 20 sheets, depending on the paper weight. Tray 3/4 Not supported Orientation Tray 1 Face down (Manual Feed Tray) Tray 2 Face up Driver Transparency Media Type Duplexing Not supported Glossy Mode Not supported " Always first test a small quantity of a particular type of transparency. Use transparencies that are „ Approved for laser printing 116 Media Types