Konica Minolta magicolor 7450 II grafx magicolor 7450 II Reference Guide
Konica Minolta magicolor 7450 II grafx Manual
View all Konica Minolta magicolor 7450 II grafx manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta magicolor 7450 II grafx manual content summary:
- Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 1
Reference Guide 4039-9572-11A - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 2
KONICA MINOLTA. The information contained in this guide is intended for use with the KONICA MINOLTA magicolor 7450II printers only. About the GPL (General Public License) This driver particular purpose with regard to this manual. KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. assumes no responsibility for - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 3
This package contains the following materials provided by Konica Minolta Business Technologies, Inc. (KMBT): software included following: 1. You may use the Printing Software and accompanying Font Programs for imaging to the licensed output device(s), solely for your own internal business purposes. - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 4
About Adobe Color Profile ADOBE SYSTEMS INCORPORATED COLOR PROFILE LICENSE only (a) as embedded within digital image files and (b) on a under no obligation to provide any support under this Agreement, including upgrades or Adobe against any losses, damages or costs arising from any claims, lawsuits - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 5
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS, DAMAGES, CLAIMS OR COSTS OR FOR ANY CLAIM BY ANY THIRD PARTY. THE FOREGOING LIMITATIONS AND Adobe logo are the registered trademarks or trademarks of Adobe in the United States and other countries. With the exception of referential use, you will - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 6
by the conflict of law rules of any jurisdiction or the United Nations Convention on Contracts for the International Sale of Goods, the conditions. "TOYO INK Standard Color on Coated paper" is compatible with "JAPAN COLOR". Agreement 1. The reproduction of images on a printer or a monitor using this - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 7
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 8
This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson ([email protected]). Original SSLeay License Copyright ©1995-1998 Eric Young ([email protected]) All rights reserved. This package is an SSL implementation - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 9
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of CMU and The Regents of - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 10
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 11
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 12
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 13
Contents 1 Operation on Mac OS X 1 System Requirements for the Printer Driver 2 Installing the Printer Driver 3 Installing the Printer Driver 3 Uninstalling the printer driver 8 For Mac OS X 10.2 8 For Mac OS X 10.3/10.4 8 For Mac OS X 10.5/10.6 9 Print Center Settings (Mac OS X 10.2) 10 When - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 14
74 Error Handling 75 Paper Feed 76 Color Options 77 Advanced Color Options/Image 78 Advanced Color Options/Text 79 Advanced Color Options/Graphics 80 Advanced Color Options/Simulation 82 Printer Features 83 Supply Levels 84 Summary 85 Specifying Print Settings (Mac OS X 10.5/10.6) 86 Print Dialog - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 15
Summary 101 Specifying the Color Profile 102 Preparation 102 Downloading Color Profiles 102 Specifying Printer Driver Settings 104 Troubleshooting 109 2 Operation on Mac OS 9 111 System Requirements for the Printer Driver 112 Installing the Printer Driver 113 Selecting the Printer in the Chooser - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 16
Settings Page 151 Printer Driver Settings 152 Extra 152 General 152 Graphics Options 153 Image Options 154 Options Installed 154 Simulation 155 Text Options 155 Banners 156 Printing a Document 157 Example Using LPR Command 157 Example Using OpenOffice 158 Checking Print Jobs 162 Troubleshooting 163 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 17
the Address Manually 187 Printer Wizard - Windows Server 2003/XP/2000 197 Adding an IPP Port using Add Printer Wizard - Windows Vista/7/Server 2008 199 If the bit number differs between the server operating system and client operating system 202 Installing the Additional Driver 202 Troubleshooting - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 18
above) 228 Done Job List 229 Print Page 231 Default Settings 231 Download Font/Form 241 Report Types 245 Direct Print 246 Configuring the Printer 247 System Page 247 Date/Time 247 Admin Password 249 Device Information 251 ROM Version 254 Online Assistance 255 Maintenance 257 Alert Mail 259 Print - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 19
Network Page 292 TCP/IP 292 Bonjour 298 NetWare 299 IPP 303 FTP 307 SNMP 308 SMB 309 AppleTalk 310 Email 311 SSL/TLS 313 Account Page 324 Log Accounting 324 Contents vii - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 20
viii Contents - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 21
Operation on Mac OS X - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 22
connection, Network connection (10Base-T/100Base-TX/1000Base-T) Mac OS X and X Server (10.2/10.3/10.4/10.5/ 10.6) (We recommend installing the newest patch.) More than OS recommendation (128 MB or more is recommended) 256 MB or more (for storing images) 2 System Requirements for the Printer Driver - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 23
. Installing the Printer Driver " The procedure for installing the printer driver on Mac OS X 10.4 is described below. The following procedure or some steps may be different depending on the version of the operating system being used. Complete the installation according to the instructions in the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 24
4 Click Continue. 5 Check the Read Me information, and then click Continue. 4 Installing the Printer Driver - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 25
6 Check the details of the license agreement, and then click Continue. 7 Click Agree if you agree to the terms of the license. Installing the Printer Driver 5 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 26
8 In the Select Destination page, select the disk in which you wish to install the software, and then click Continue. 9 Click Install. 6 Installing the Printer Driver - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 27
10 Enter the administrator user name and password in the Authenticate dia- log box, and then click OK. The installer for the printer driver starts up. 11 After the installation has been completed, click Close. This completes the installation of the printer driver. Installing the Printer Driver 7 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 28
KONICA MINOLTA mc7450PS.gz 5 Delete the unnecessary files from Library - Printers. - Drag the KONICA MINOLTA mc7450 Color.plugin file, which is located in Library - Printers . This completes uninstallation of the printer driver. For Mac OS X 10.3/10.4 1 Open Printer Setup Utility, which is located - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 29
Printers. - Drag the KONICA MINOLTA mc7450 Color.plugin file, which is located in Library - Printers - KONICAMINOLTA - PDEs, to the Trash icon. - Drag the pstomc7450PS file, which is located in Library - Printers computer. This completes uninstallation of the printer driver. For Mac OS X 10.5/10.6 1 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 30
Print Center Settings (Mac OS X 10.2) When Using a USB Connection 1 Use a USB cable to connect the printer to your computer. 2 Check that the printer is turned on, and then restart the computer. 3 Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities. 4 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 31
list. " If magicolor 7450 does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. 7 Select KONICA MINOLTA from the Printer Model pop-up menu. 8 Select KONICA MINOLTA mc7450 PPD in the Model Name list. Print Center Settings (Mac OS X 10 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 32
9 Click Add. The new printer appears in the Printer List screen. " If any options are installed, select them. , IP printing setting, IPP setting and Specifying Port 9100. AppleTalk Setting 1 Connect the printer to an Ethernet network. 2 Open Print Center, which can be accessed by clicking Startup - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 33
4 Select AppleTalk from the pop-up menu. 5 Select MC7450-xxxxxx. " "XXXXXX" refers to the last six digits of the MAC address (in hexadec- imal). 6 Select KONICA MINOLTA from the Printer Model pop-up menu. Print Center Settings (Mac OS X 10.2) 13 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 34
7 Select KONICA MINOLTA mc7450 PPD in the Name list. 8 Click Add. The new printer appears in the Printer List screen. " If any options are installed, select them. For details, refer to "Selecting Print Options" on page 60. Rendezvous Setting 1 Connect the printer to an Ethernet network. 2 Open - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 35
Add in the Printer List. 4 Select Rendezvous from the pop-up menu. 5 Select KONICA MINOLTA magicolor 7450(xx:xx:xx). " "xx:xx:xx" refers to the last six digits of the MAC address (in hexadeci- mal). 6 Select KONICA MINOLTA from the Printer Model pop-up menu. Print Center Settings (Mac OS X 10 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 36
7 Select KONICA MINOLTA mc7450 PPD in the Model Name list. 8 Click Add. The new printer appears in the Printer List screen. " If any options are installed, select them. For details, refer to "Selecting Print Options" on page 60. 16 Print Center Settings (Mac OS X 10.2) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 37
IP Printing Setting 1 Connect the printer to an Ethernet network. 2 Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities. 3 Click Add in the Printer List. 4 Select IP Printing from the pop-up menu. Print Center Settings (Mac OS X 10.2) 17 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 38
5 Enter the IP address for the printer in the Printer's Address text box. 6 Select KONICA MINOLTA from the Printer Model pop-up menu. 7 Select KONICA MINOLTA mc7450 PPD in the Model Name list. 18 Print Center Settings (Mac OS X 10.2) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 39
, refer to "Selecting Print Options" on page 60. IPP Setting 1 Connect the printer to an Ethernet network. 2 Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities. 3 In the Printer List, click Add while pressing the Option key in the key- board. Print - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 40
4 Select Advanced from the pop-up menu. 5 Select Internet Printing Protocol (http) from the Device pop-up menu. 6 Enter the name for the printer in the Device Name text box. 20 Print Center Settings (Mac OS X 10.2) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 41
7 In the Device URI text box, enter "http:///ipp". 8 Select KONICA MINOLTA from the Printer Model pop-up menu. 9 Select KONICA MINOLTA mc7450 PPD in the Name list. Print Center Settings (Mac OS X 10.2) 21 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 42
List screen. " If any options are installed, select them. For details, refer to "Selecting Print Options" on page 60. Specifying Port 9100 1 Connect the printer to an Ethernet network. 2 Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities. 3 In the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 43
4 Select Advanced from the pop-up menu. 5 Select AppSocket/HP JetDirect from the Device pop-up menu. 6 Enter the name for the printer in the Device Name text box. Print Center Settings (Mac OS X 10.2) 23 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 44
7 In the Device URI text box, enter "socket://". 8 Select KONICA MINOLTA from the Printer Model pop-up menu. 9 Select KONICA MINOLTA mc7450 PPD in the Name list. 24 Print Center Settings (Mac OS X 10.2) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 45
10 Click Add. The new printer appears in the Printer List screen. " If any options are installed, select them. For details, refer to "Selecting Print Options" on page 60. Print Center Settings (Mac OS X 10.2) 25 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 46
4 In the Printer List, click Add. 5 Select USB from the pop-up menu. 6 Select magicolor 7450 in the Product list. " If magicolor 7450 does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. 26 Printer Setup Utility Settings (Mac OS X 10 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 47
7 Check that KONICA MINOLTA mc7450 PPD is selected in the Printer Model list. 8 Click Add. The new printer appears in the Printer List screen. " If any options are installed, select them. For details, refer to "Selecting Print Options" on page 60. Printer Setup Utility Settings (Mac OS X 10.3) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 48
Connection The network connection settings can be specified IP printing Setting (IPP, LPD or Socket). AppleTalk Setting 1 Connect the printer to an Ethernet network. 2 Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. 3 Click Add in the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 49
" refers to the last six digits of the MAC address (in hexadec- imal). 6 Select KONICA MINOLTA from the Printer Model pop-up menu. 7 Select KONICA MINOLTA mc7450 PPD in the Model Name list. 8 Click Add. The new printer appears in the Printer List screen. " If any options are installed, select - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 50
, then Utilities. 3 Click Add in the Printer List. 4 Select Rendezvous from the pop-up menu. 5 Select KONICA MINOLTA magicolor 7450(xx:xx:xx) in the Name list. " "xx:xx:xx" refers to the last six digits of the MAC address (in hexadeci- mal). 30 Printer Setup Utility Settings (Mac OS X 10.3) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 51
6 Select KONICA MINOLTA from the Printer Model pop-up menu. 7 Select KONICA MINOLTA mc7450 PPD in the Model Name list. 8 Click Add. The new printer appears in the Printer List screen. " If any options are installed, select them. For details, refer to "Selecting Print Options" on page 60. IP - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 52
Printing from the pop-up menu. 5 Select desired print protocol from the Printer Type pop-up menu. " - For an LPD setup, select LPD/LPR. - For an IPP setup, select Internet Printing Protocol. - For a port 9100 setup, select Socket/HP Jet Direct. 32 Printer Setup Utility Settings (Mac OS X 10.3) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 53
6 Enter the IP address for the machine in the Printer Address text box. 7 Select KONICA MINOLTA from the Printer Model pop-up menu. 8 Select KONICA MINOLTA mc7450 PPD in the Model Name list. Printer Setup Utility Settings (Mac OS X 10.3) 33 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 54
9 Click Add. The new printer appears in the Printer List screen. " If any options are installed, select them. For details, refer to "Selecting Print Options" on page 60. 34 Printer Setup Utility Settings (Mac OS X 10.3) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 55
and check that the printer is turned on. 2 Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. 3 In the Printer List, click Add. The detected printer appears in the Printer Browser. Printer Setup Utility Settings (Mac OS X 10.4) 35 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 56
4 Select magicolor 7450 in the Printer Browser. " If magicolor 7450 does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. 5 Check that KONICA MINOLTA mc7450 PPD is selected in the Printer Using list. 6 Click Add. The new printer appears - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 57
be specified in one of several ways: Bonjour Setting, AppleTalk setting, IP printing setting (IPP, LPD or Socket). Bonjour Setting 1 Connect the printer to an Ethernet network. 2 Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. 3 In the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 58
4 Select KONICA MINOLTA magicolor 7450(xx:xx:xx) in the Printer Browser. " "xx:xx:xx" refers to the last six digits of the MAC address (in hexadeci- mal). 5 Check that KONICA MINOLTA mc7450 PPD is selected in the Print Using list. 6 Click Add. 38 Printer Setup Utility Settings (Mac OS X 10.4) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 59
7 Select the appropriate settings in the Printer Memory, Hard Disk, Paper Source Unit and Duplex Unit according to your printer setup. 8 Click Continue. The new printer appears in the Printer List screen. Printer Setup Utility Settings (Mac OS X 10.4) 39 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 60
1 Connect the printer to an Ethernet network. 2 Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. 3 In the Printer List, click Add. The detected printer appears in the Printer Browser. 40 Printer Setup Utility Settings (Mac OS X 10 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 61
Browser. " "xxxxxx" refers to the last six digits of the MAC address (in hexadeci- mal). 5 Check that KONICA MINOLTA mc7450 PPD is selected in the Printer Using list. 6 Click Add. The new printer appears in the Printer List screen. 7 Click Add. " If any options are installed, select them. For - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 62
IP Printing Setting 1 Connect the printer to an Ethernet network. 2 Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. 3 Click Add in the Printer List. 4 Click IP Printer. 42 Printer Setup Utility Settings (Mac OS X 10.4) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 63
5 Select desired print protocol from the Protocol pop-up menu. " -For an IPP setup, select Internet Printing Protocol - IPP. -For an LPD setup, select Line Printer Daemon - LPD. -For a port 9100 setup, select HP Jet Direct - Socket. Printer Setup Utility Settings (Mac OS X 10.4) 43 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 64
6 Enter the IP address for the printer in the Address text box. " -For an IPP setup, type "ipp" in the Queue text box. 7 Check that KONICA MINOLTA mc7450 PPD is selected in the Printer Using list. 8 Click Add. 44 Printer Setup Utility Settings (Mac OS X 10.4) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 65
9 Select the appropriate settings in the Printer Memory, Hard Disk, Paper Source Unit and Duplex Unit according to your printer setup, and then click Continue. The new printer appears in the Printer List screen. Printer Setup Utility Settings (Mac OS X 10.4) 45 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 66
Printer Settings (Mac OS X 10.5/10.6) When Using a USB Connection 1 Use a USB cable to connect the printer to your computer. 2 Select System Preferences from the Apple menu. 3 Click Print & Fax. 4 In the Print & Fax, click + button. 46 Printer Settings (Mac OS X 10.5/10.6) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 67
The detected printer appears in the Printer Browser. 5 Select KONICA MINOLTA magicolor 7450 in the Printer Name list. Printer Settings (Mac OS X 10.5/10.6) 47 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 68
If KONICA MINOLTA magicolor 7450 does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. 6 Check that KONICA MINOLTA mc7450 PPD is selected in the Print Using list. 7 Click Add. 8 Select the appropriate settings in the Printer Memory, Hard - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 69
9 Click Continue. The new printer appears in the Print & Fax screen. Printer Settings (Mac OS X 10.5/10.6) 49 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 70
Setting 1 Connect the machine to an Ethernet network. 2 Select System Preference from the Apple menu. 3 Click Print & Fax. 4 In the Print & Fax, click + button. 50 Printer Settings (Mac OS X 10.5/10.6) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 71
The detected printer appears in the Printer Browser. 5 Select KONICA MINOLTA magicolor 7450(xx:xx:xx) in the Printer Name list. " "xx:xx:xx" refers to the last six digits of the MAC address (in hexadeci- mal). Printer Settings (Mac OS X 10.5/10.6) 51 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 72
that KONICA MINOLTA mc7450 PPD is selected in the Print Using list. 7 Click Add. 8 Select the appropriate settings in the Printer Memory, Hard Disk, Paper Source Unit, and Duplex Unit according to your printer setup. 9 Click Continue. The new printer appears in the Print & Fax screen. 52 Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 73
AppleTalk Setting 1 Connect the machine to an Ethernet network. 2 Select System Preference from the Apple menu. 3 Click Print & Fax. 4 In the Print & Fax, click + button. The detected printer appears in the Printer Browser. Printer Settings (Mac OS X 10.5/10.6) 53 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 74
5 Select MC7450-xxxxxx in the Printer Name list. " "xxxxxx" refers to the last six digits of the MAC address (in hexa- decimal). 6 Check that KONICA MINOLTA mc7450 PPD is selected in the Print Using list. 54 Printer Settings (Mac OS X 10.5/10.6) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 75
Memory, Hard Disk, Paper Source Unit, and Duplex Unit according to your printer setup. 9 Click Continue. The new printer appears in the Printer List screen. " If any options are installed, select them. For details, refer to "Selecting Print Options" on page 60. Printer Settings (Mac OS X 10 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 76
IP Printing Setting 1 Connect the machine to an Ethernet network. 2 Select System Preference from the Apple menu. 3 Click Print & Fax. 4 In the Print & Fax, click + button. 56 Printer Settings (Mac OS X 10.5/10.6) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 77
5 Click IP. 6 Select desired print protocol from the Protocol pop-up menu. " - For an IPP setup, select Internet Printing Protocol - IPP. - For an LPD setup, select Line Printer Daemon - LPD. - For a port 9100 setup, select HP Jetdirect - Socket. Printer Settings (Mac OS X 10.5/10.6) 57 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 78
7 Enter the IP address for the machine in the Address text box. " - For an IPP setup, type "ipp" in the Queue text box. 8 Check that KONICA MINOLTA mc7450 PPD is selected in the Print Using list. 9 Click Add. 58 Printer Settings (Mac OS X 10.5/10.6) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 79
10 Select the appropriate settings in the Printer Memory, Hard Disk, Paper Source Unit, and Duplex Unit according to your printer setup. 11 Cliclk Continue. The new printer appears in the Print & Fax screen. Printer Settings (Mac OS X 10.5/10.6) 59 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 80
Selecting Print Options For Mac OS X 10.2/10.3/10.4 1 Open Printer Setup Utility (Print Center), which can be accessed by clicking Startup Disk, then Applications, then Utilities. 2 Select this printer in the Printer List, and then select Show Info from the Printers menu. 3 Select Installable - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 81
4 Select the appropriate settings in the Printer Memory, Hard Disk, Paper Source Unit and Duplex Unit pop-up menus according to your printer setup, and then click Apply Changes. 5 Close the Printer Info dialog box. Selecting Print Options 61 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 82
For Mac OS X 10.5/10.6 1 Select System Preference from the Apple menu. 2 Click Print & Fax. 3 Select this printer in the Printers List, and then click Options & Sup- plies. 4 Select Driver. 62 Selecting Print Options - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 83
5 Select the appropriate settings in the Printer Memory, Hard Disk, Paper Source Unit, and Duplex Unit according to your printer setup. 6 Click OK. 7 Close the Print & Fax screen. Selecting Print Options 63 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 84
from the File menu in the application being used. 1 Select Page Setup... from the File menu. The Page Setup dialog box appears. 2 Select this printer in the Format for pop-up menu. You can select the following sections from the Settings pop-up menu. Section Page Attributes Custom Paper Size - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 85
want to enlarge or reduce the size of the printout, enter the scale ratio here (25-400%) " Regardless of which paper size is selected, the printer does not print within 0.157" (4 mm) of the edge of the paper. Specifying Page Setup Settings 65 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 86
width for the custom page size. Height: 5.5 - 18.0" (140 - 457 mm) for Tray 2/3/4/5. 5.5 - 47.0" (140 - 1200 mm) for Tray 1 (Manual Feed Tray). Width: 3.6 - 12.2" (90 - 311 mm) Printer Margins Enter the dimensions for the top, left, right, and bottom margins. " Regardless of which paper size is - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 87
Specifying Print Settings (Mac OS X 10.4) The following dialog box appears when Print... is selected from the File menu in the application being used. 1 Select Print... from the File menu. The Print dialog box appears. 2 Select this printer in the Printer pop-up menu. The Print dialog box is used to - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 88
Section Copies & Pages Layout Scheduler Paper Handling ColorSync Cover Page Error Handling Paper Feed Color Options Printer Features Description This section contains options for the number of copies to be printed and the back of the paper is printed. 68 Specifying Print Settings (Mac OS X 10.4) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 89
This section provides information for checking the amount of service life remaining on each consumable. This is used to box. PDF Click this button to select PDF menu. The print output can be save as a PDF file, or to send a fax. Preview Click this button to view a preview image of the printout - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 90
collate function is provided with the application, the setting speci- fied from the application is given priority, and the setting specified in the printer driver is ignored. Pages All: Prints all pages in the document. From, to: Specifies the range of pages to be printed. 70 Specifying Print - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 91
on each sheet of paper. Border This prints a border around the image for each of the pages printed on one sheet of paper when more the desired setting for double-sided printing when the optional duplexing unit is installed. Off: Double-sided printing is not performed. Long Mac OS X 10.4) 71 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 92
Long-edged binding check box or Short-edged binding check box can be selected even when the Duplex Unit is not installed. However, in this case, the print job will be cancelled. Scheduler The Scheduler section priority for printing jobs that are being held. 72 Specifying Print Settings (Mac OS X 10.4) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 93
created by software applications. Scale to fit paper size: Select this option to fit the document size to the size of paper used by the printer. Specify the size of paper used by the printer. Specifying Print Settings (Mac OS X 10.4) 73 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 94
host-based color matching or printer-based color matching. Quartz Filter Allows you to select Quartz Filter. Cover Page Print Cover Page Allows you to set cover page before or after document. Cover Page Type Allows you to select cover page type. 74 Specifying Print Settings (Mac OS X 10 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 95
PostScript Errors Allows you to select whether or not a report is outputted when a PostScript error occurs. Tray Switching This feature is not available with this printer. Specifying Print Settings (Mac OS X 10.4) 75 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 96
paper tray when the first page is to be printed on paper from a different tray. " If an optional tray is installed, select Paper Source Unit under Install- able Options (p. 60). If Paper Source Unit is not selected, Tray 3/4/5 appear in gray and cannot be selected. 76 Specifying Print Settings - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 97
effective. Brightness Allows you to set Brightness. Color as Grayscale Allows you to set Grayscale color. Color Separation Allows you to set Color Separation. Advanced Color Options Click this button to display the Advanced Color Options pane. Specifying Print Settings (Mac OS X 10.4) 77 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 98
. Destination Profile Allows you to select Destination Profile for images. Halftone Allows you to select halftone for images. Hide Advanced Options Click this button to hide the Advanced Color Options pane and display the Color Options pane. Manage Profile Click this button to display the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 99
you to select Destination Profile for text. Halftone Allows you to select halftone for text. Hide Advanced Options Click this button to hide the Advanced Color Options pane and display the Color Options pane. Specifying Print Settings (Mac OS X 10.4) 79 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 100
and Simulation Profile of the Advanced Color Options pane. Download Manager Click up Download Manager from the Advanced Color Options pane, Download Manager must be Color Options/Graphics RGB Source Allows you to select RGB color profiles for graphics. RGB Intent Allows you to select color - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 101
Color Options pane and display the Color Options pane. Manage Profile Click this button to display the Color Profile Management dialog box. From this dialog box, color Simulation Profile of the Advanced Color Options pane. Download Manager from the Advanced Color Options pane, Download Manager - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 102
Color Options pane and display the Color Options pane. Manage Profile Click this button to display the Color Profile Management dialog box. From this dialog box, color Simulation Profile of the Advanced Color Options pane. Download Manager from the Advanced Color Options pane, Download Manager - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 103
be installed. If a collate function is provided with the application, the setting specified from the application is given priority, and the setting specified in the printer driver is ignored. Specifying Print Settings (Mac OS X 10.4) 83 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 104
Supply Levels The Supply Levels section provides information for checking the amount of service life remaining on each consumable. " The Supply Levels section appears when a printer is created on Mac OS X v10.4 with a Bonjour, IPP, LPD, Socket connection. " The Supply Levels section may not - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 105
Summary The Summary is used to check the currently selected print settings. Specifying Print Settings (Mac OS X 10.4) 85 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 106
from the File menu. The Print dialog box appears. 2 Select this printer in the Printer pop-up menu. The Print dialog box is used to specify the following print options. Print Dialog Box Section Layout Color Matching Paper Handling Paper Feed Cover Page Description This section contains options for - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 107
Color Options Printer Features Supply Levels Summary Description This section contains options for specifying the print timing and priority of jobs. This section contains options for color of service life remaining PDF Click this button to select the PDF menu. The print output can be saved as a PDF - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 108
the application, the setting specified from the application is given priority, and the setting specified in the printer driver is ignored. Pages All: Prints all pages in the document. From, to: Specifies the range on each sheet of paper. 88 Specifying Print Settings (Mac OS X 10.5/10.6) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 109
image both sides of the paper, Duplex Unit must be selected under Installable Options (p. 62) The Long Color Matching Color Matching ColorSync: Allows you to select host-based color matching. Vendor Matching: Allows you to select printer-based color matching. Specifying Print Settings (Mac - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 110
used by the printer. Scale down only: Page Order Select this option to reduce the printing size. Automatic: Select this option to print in the original page order of the document. Normal: Select this option to print in the normal page order. 90 Specifying Print Settings (Mac OS X 10.5/10 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 111
paper tray when the first page is to be printed on paper from a different tray. " If an optional tray is installed, select Paper Source Unit under Install- able Options (p. 62). If Paper Source Unit is not selected, Tray 3/4/5 appear in gray and cannot be selected. Specifying Print Settings - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 112
Cover Page Print Cover Page Allows you to set cover page before or after document. Cover Page Type Allows you to select cover page type. Billing Info Allows you to set billing information printed on cover page. 92 Specifying Print Settings (Mac OS X 10.5/10.6) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 113
printing. On Hold: Select this option to hold the print job. Priority Select the priority for printing jobs that are being held. Specifying Print Settings (Mac OS X 10.5/10.6) 93 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 114
preset. Brightness Allows you to set Brightness. Color as Grayscale Allows you to set Grayscale color. Color Separation Allows you to set Color Separation. Advanced Color Options Click this button to display the Advanced Color Options pane. 94 Specifying Print Settings (Mac OS X 10.5/10.6) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 115
. Destination Profile Allows you to select Destination Profile for images. Halftone Allows you to select halftone for images. Hide Advanced Options Click this button to hide the Advanced Color Options pane and display the Color Options pane. Manage Profile Click this button to display the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 116
button to display the Color Profile Management dialog box. From this dialog box, color profiles can be added or deleted to those available as settings for RGB Source, Destination Profile and Simulation Profile of the Advanced Color Options pane. 96 Specifying Print Settings (Mac OS X 10.5/10.6) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 117
button to display the Color Profile Management dialog box. From this dialog box, color profiles can be added or deleted to those available as settings for RGB Source, Destination Profile and Simulation Profile of the Advanced Color Options pane. Specifying Print Settings (Mac OS X 10.5/10.6) 97 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 118
button to display the Color Profile Management dialog box. From this dialog box, color profiles can be added or deleted to those available as settings for RGB Source, Destination Profile and Simulation Profile of the Advanced Color Options pane. 98 Specifying Print Settings (Mac OS X 10.5/10.6) - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 119
Printer Features Nearest Size and Scale If no paper tray contains paper of the specified size, the page is automatically enlarged or reduced and paper of the most appropriate size is selected. Manually in the printer driver is ignored. Specifying Print Settings (Mac OS X 10.5/10.6) 99 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 120
Supply Levels The Supply Levels section provides information for checking the amount of service life remaining on each consumable. " The Supply Levels section appears when a printer is created on Mac OS X 10.5 and 10.6 with a Bonjour, IPP, LPD, Socket connection. " The Supply Levels section may - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 121
Summary The Summary is used to check the currently selected print settings. Specifying Print Settings (Mac OS X 10.5/10.6) 101 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 122
can be performed by specifying any color profile. " The procedure for specifying the color profile on Mac OS X 10.5 is described below. Preparation Install the printer driver, and then add the printer. For details on adding the printer, refer to "Printer Settings (Mac OS X 10.5/10.6)" on page 46 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 123
3 Click Download, and then select Disk beside Location. 4 Click Browse, and then select the color profile to be downloaded. " File names for color profiles should be in the following format: 8 or less ASCII characters + 3 or less ASCII extension characters. 5 Click Download Profile. Downloading - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 124
Exit. 8 Save to the computer the color profile downloaded to the printer. " Next, specify the printer driver settings. Specifying Printer Driver Settings Add the color profile to the printer driver. 1 Display the Print dialog box for the application. 2 Select Color Options. 104 Specifying the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 125
3 Select Custom beside Quick Color, and then click Advanced Color Options. 4 Click Manage Profile. Specifying the Color Profile 105 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 126
5 From Profile List, select the profile to be added, and then click Add. " For an IPP (Internet Printing Protocol), LPD (Line Printer Daemon) or Socket/HP JetDirect (Port 9100) connection, continue with step 8. 106 Specifying the Color Profile - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 127
6 Click Browse, and then select the color profile saved to the computer in the previous section. " If necessary, type a description of the profile in the Profile Name box. 7 Click OK. Specifying the Color Profile 107 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 128
8 Check that the color profile is added to the list and that the check box beside its file name is selected, and then click OK. 9 Select the added color profile before printing. 108 Specifying the Color Profile - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 129
Tray 4 or Tray 5, a media type error appears and the printer stops. Be sure to specify a media type supported by Tray 3, Tray 4 and Tray 5. Checking the version num- For Mac OS X 10.4: ber of the printer driver and Select the printer from Printer Setup Util- PPD file. ity, and then click Show - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 130
pages are not print using the Preview application provided correctly collated or the by the operating system. print job is cancelled. When using Mac OS X 10.5/10.6, constraint processing is not applied during printing if certain settings have been specified. This is a limitation of the operating - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 131
Operation on Mac OS 9 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 132
mode (9.2.2 or later) RAM Available disk space When using the Classic environment of Mac OS X, Mac OS X 10.2.6 or later is required. More than OS recommendation (128 MB or more is recommended) 256 MB or more is recommended (for storing images) 112 System Requirements for the Printer Driver - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 133
on the version of the operating system being used. Complete the installation according to the instructions in the dialog boxes that appear. 1 Insert the Printer Driver CD/DVD in the CD/DVD-ROM drive of your Mac- intosh. 2 Double-click the CD icon on desktop, and then double-click the mc7450 OS9 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 134
4 Click Install. The installer installs the printer driver. Installation starts. 5 After the installation has been completed, click Quit. This completes the installation of the printer driver. 114 Installing the Printer Driver - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 135
in the Chooser Use the Chooser to use AppleTalk to connect the printer. 1 Use an 10Base-T/100Base-TX/1000Base-T cable to connect the printer to a Ethernet network. 2 Select Chooser from the Apple menu. " When using Mac OS X, the Apple menu is available with the icon for the Classic environment - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 136
the LaserWriter 8 icon from the icons on the left side of the Chooser. The printer name appears in the Select a printer section on the right side of the Chooser. 4 Select the printer. 5 Click Create. 6 Select KONICA MINOLTA mc7450PS en, then click Select. 116 Selecting the Printer in the Chooser - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 137
printer indicated below, according to the language of the operating system. - Czechoslovakian: KONICA MINOLTA mc7450PS cs - German: KONICA MINOLTA mc7450PS de - Spanish: KONICA MINOLTA mc7450PS es - French: KONICA MINOLTA mc7450PS fr - Italian: KONICA MINOLTA mc7450PS it - Japanese: KONICA MINOLTA - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 138
Utility to use a USB cable to connect the printer. 1 Use the USB cable to connect the printer and your computer. 2 From Hard Disk, select Desktop Printer Utility. 3 Select LaserWriter 8 from With pop-up menu. 4 Select Printer (USB) from Create Desktop list. 5 Click OK. 6 Select Change to select - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 139
7 Select KONICA MINOLTA mc7450PS en from the list of PPD files. 8 Click Select. 9 Click Change to select the USB Printer. 10 Select magicolor 7450 from the Select a USB Printer list. Selecting the Printer in the Desktop Printer Utility 119 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 140
OK. 12 Click Create. 13 Click Save. 14 Specify a printer name in the Save desktop printer as text box, and then click Save. The icon for magicolor 7450 appears on the desktop. " In the Classic environment, no icon appears on the desktop. 120 Selecting the Printer in the Desktop Printer Utility - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 141
Selecting Print Options 1 Click the printer icon that was created. 2 Select Printing - Change Setup... from the menu bar. 3 Select the option that you want to change in Change under Installable Options, - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 142
, enter the scale ratio (25%-400%) here. Orientation Select either a vertical or horizontal page orientation for printouts. " Regardless of which paper size is selected, the printer does not print within 0.157 inch (4 mm) of the edge of the paper. 122 Specifying Page Setup Settings - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 143
-311.1mm) Margin Enter the dimensions for the top, left, right and bottom margins. Custom Page Size Name Enter a name for the custom paper size. Units Select the measurement units for values. Specifying Page Setup Settings 123 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 144
used for the dimensions for Width, Height and Mar- gins is inches. To specify the dimensions in millimeters, select cm or pts from the Units pop-up menu. 4 To add several different custom paper sizes, click New and repeat step 3. " To delete an existing custom paper size, select the custom - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 145
Specifying Print Settings The following dialog box appears when Print... is selected from the File menu in the application being used. You can specify the following options from the Print dialog box. Specifying Print Settings 125 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 146
Matching Cover Page Font Settings Job Logging Layout Save as File Watermark Job Retention Color Options Image Options Text Options Graphics Options Simulation Options Printer Features Description This section contains options for the number of copies to be printed, the paper source, and the range - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 147
" No warning message will be displayed if options that cannot be used together are selected. Common buttons Cancel Click this button to close the Print dialog box without applying any of the settings. OK Click this button to print using the selected print options. Save Settings Click this - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 148
text box. Paper Source Allows you to select the tray that the printer uses for the print job and to choose a different tray for the an optional tray is installed select Unit 3, Unit 3+4 or Unit 3+4+5 under Selecting Print Options (p. 121). If Unit 3, Unit 3+4 or Unit 3+4+5 is not selected, Tray - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 149
Background Printing Print in Allows you to choose between printing in foreground and printing in background. Printing in background creates a spool file that is temporarily saved on your computer until the print job is ready to be processed. This allows you to continue working in your applications - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 150
Allows you to specify the color matching configuration or allow for automatic configuration. This item is disabled (grayed out) unless ColorSync Color Matching is the selected Print Color setting. Printer Profile Allows you to select from the printer profiles that are available. 130 Specifying - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 151
containing the cover Paper Source page media. The Cover Page contains information about the print job such as: user name, application, document name, date, time, printer, and number of pages. This option is disabled (grayed out) if Print Cover Page is set to None. Specifying Print Settings 131 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 152
Format: Allows you to select the preferred font format. - Always download needed fonts: If selected, fonts should always be downloaded to the printer. Printer fonts are not used. - Never generate Type 42 format: If selected, Type 42 fonts are not gen- erated. - Use Defaults: Restores factory - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 153
Job Logging If there is a PostScript error Allows you to select whether or not a report is outputted when a PostScript error occurs. Job Documentation Allows you to specify generating a job copy in the folder specified as the Job Documentation Folder, and generating a job font log following the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 154
Print on Both Sides Allows you to configure the print job for duplex printing. This setting is disabled (grayed out) unless an optional duplex unit is installed. Binding Determines the orientation of the logical pages on the physical sheet so the printed media is oriented for binding on the short - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 155
Save as File Format Select the file format of the output file. PostScript Level Allows you to select from available PostScript levels. Data Format Sends the print job data to the file in either ASCII or Binary format. Font Inclusion Allows you to choose the fonts that are included with the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 156
selected. Font Allows you to select watermark font type. Size Allows you to select watermark font size. Color Allows you to select watermark font color. Transparent Allows you to set watermark transparency. Position Allows you to select watermark position. 136 Specifying Print Settings - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 157
intentionally deleted or the held job timeout occurs. - Proof then Print: Printer prints 1 copy without the panel operation. You can then print the copies are printed. " For details on each printing procedure, refer to the User's Guide. Job Name Allows you to set Job Name. User Name Allows you - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 158
installed on the printer. In addition, the printer must be set up with the Chooser to use the Hard Disk. For details on selecting the Hard Disk with the Chooser, refer to "Selecting Print Options" on page 121. Color Options Brightness Allows you to set Brightness of the image. Color as Grayscale - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 159
Graphics Options RGB Source Allows you to select RGB color profiles for images, text and graphics. RGB Intent Allows you to select RGB intent for images, text and graphics. RGB Gray Treatment Allows you to select RGB gray treatment for images, text and graphics. Halftone Allows you to select - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 160
Simulation Options Simulation Profiles Allows you to select RGB color profiles for simulation. Match Paper Color Allows you to set Match Paper Color. CMYK Gray Treatment Allows you to select CMYK gray treatment. 140 Specifying Print Settings - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 161
Printer Features Nearest Size and Scale If no paper tray contains paper of the specified size, the page is automatically enlarged or reduced and paper of the most appropriate size is selected. Manually Print on 2nd Side This feature must be set when you set paper already printed on the front - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 162
Checking Print Jobs To check the progress of print jobs, double-click the magicolor 7450 desktop printer icon. " In the Classic environment, Print Monitor automatically starts up, and the icon appears in the Dock. Click the Print Monitor icon to check the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 163
be printed on. In addition, there are limitations on the media types that can be selected. Refer to the User's Guide (Utilities and Documentation CD/DVD) provided with the printer. When printing from a Web Depending on the Web browser being used, browser, each frame is each frame will be printed - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 164
144 Troubleshooting - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 165
Operation on Linux - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 166
System Requirements for the Printer Driver Before installing the printer driver, make sure that your system meets the following system requirements. Operating systems Red Hat Linux 9.0, SuSE Linux 8.2 Connecting the computer USB connection, Parallel connection, Net- and printer work connection - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 167
in order to install ppd file. 1 Copy the ppd file from the Printer Driver CD/DVD to the "/usr/share/cups/ model/KONICA MINOLTA/" on the computer. " A ppd file for each language is available in the corresponding "Drivers/LinuxPPD/" folder on the CD/DVD. Use the appropriate ppd file for - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 168
, be sure to restart CUPS. 1 Start up the Web browser. 2 Enter the URL "http://localhost:631", and then click Manage Printers. The CUPS Administration Web page appears. 3 Click Add Printer. A pop-up window appears. 4 Enter the user name and password for using root privi- leges, and then click OK - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 169
form: socket://[:port] " Example: Using Printer IP - socket:/ /192.168.1.190:9100 Using printer Hostname socket://Hostname:9100 Hostname may be substituted by IP Address, and Port is optional. 8 Click Continue. 9 Select KONICA MINOLTA, click Continue. Adding - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 170
10 Select KONICA MINOLTA mc7450 PPD (en), then click Continue. The following message appears. 150 Adding the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 171
Printer Driver Settings Displaying the Settings Page 1 Start up the Web browser. 2 Enter the URL "http://local- host:631", and then click Manage Printers. Printer on localhost.localdomain window appears. 3 Click Configure Printer. The printer driver settings page appears. Specifying Printer Driver - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 172
Printer Driver Settings Extra Parameters Settings Brightness Specifies the brightness of the image as -15%, -10%, -5%, 0%, +5%, +10%, or +15%. The default setting is 0%. Color Separation Specifies the color separation as Yes or No. The default setting is No. Manually Print on 2nd side - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 173
Manual Feed), or Auto. The default setting is Tray 1. Specifies the paper type as Printer Postcard. The default setting is Printer Default. Graphics Options Parameters Settings Graphics or Same as Image Settings. Vivid, Photographic, Relative Color, or Absolute Color. The default - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 174
3 + Unit 4, or Unit 3 + Unit 4 + Unit 5 if the optional trays for the printer have been installed. The default setting is Disable. Select 256 MB, 512 MB, 768 MB, or 1024 MB if the optional memory for the printer has been installed. The default setting is 256 MB. 154 Specifying Printer Driver - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 175
The default setting is Composite Black. Specifies the Match Paper Color. The default setting is No. Specifies the simulation profile as Specifies RGB intent for graphics as Vivid, Photographic, Relative Color, or Absolute Color. The default setting is Vivid. Text RGB Source Specifies - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 176
. The default setting is none. Specifies the ending banner as none, classified, confidential, secret, standard, topsecret, or unclassified. The default setting is none. 156 Specifying Printer Driver Settings - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 177
box appears. 1 Click Properties in the Print dialog box. 2 The Print Properties dialog box appears. 3 Enter the command "lpr -P" followed by the name of the printer, and then click OK. The Print dialog box appears again. 4 Click Print to print the document. Printing a Document 157 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 178
to the system, refer to "Adding the Printer" on page 148. 1 From the main menu, select Office, then OpenOffice.org Printer Setup. The printer Administration dialog box appears. 2 Click New Printer. The Add Printer dialog box appears. 3 Check that Add a printer is selected, and then click Next. The - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 179
4 Click Import. 5 Click Browse. Driver Installation dialog box appears. 6 In the Path, enter "/usr/ share/cups/model". 7 In the Selection of drivers list, select KONICA MINOLTA mc7450 OpenOffice PPD, and then click OK. Printing a Document 159 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 180
8 In the Please select a suit- able driver list, select KONICA MINOLTA mc7450 OpenOffice PPD, and then click Next. 9 Select the command to be displayed in the list, then click Next. 10 Change the printer name. 11 Click Finish. The Printer Administration dialog box appears again. 12 Click Close. 13 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 181
14 Click Print in the File menu. The Print dialog box appears. 15 Select the name of the printer specified in the OpenOffice printer settings. 16 Click OK. The kprinter Print dialog box appears. Printing a Document 161 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 182
Checking Print Jobs You can check the status of print jobs from a Web browser. 1 Start up the Web browser. 2 Enter the URL "http://local- host:631". The CUPS Administration Web page appears. 3 Click Manage Jobs. A list of the currently active print jobs appear. " To check the status of completed - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 183
size and orientation Settings made with the printer driver (kprinter): Settings other than those specified above (for example, paper type, tray, and resolution) When printing from Acrobat There is a compatibility problem between Reader, part of the image Ghostscript and Acrobat Reader. Try using - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 184
164 Troubleshooting - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 185
Operation on NetWare - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 186
With NetWare The printer controller supports the following environments. Network Printing in a NetWare Environment NetWare Version Protocol Used NetWare 4.x IPX NetWare 5.x/6 IPX TCP/IP Emulation Bindery/NDS NDS NDPS(lpr) Service Mode Pserver/Nprinter Pserver For Remote Printer Mode With - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 187
Frame Type: Select Auto. (Select the frame type according to the network environment.) - Mode: Select NPrinter/RPrinter. - Printer Name: Specify the printer name. (Default: MC7450-XXXXXX) - Printer Number: Specify the printer number (0-255). When 255 is specified, the setting is Auto. 8 Restart the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 188
select Quick Setup, and then click the [Enter] button. 4 Enter the appropriate names in the Printer Server Name, Printer Name, Print Queue Name, and Print Queue Volume fields, select Other/ Unknown from the Printer type field, and then save the specified set- tings. 5 Click the [Esc] button to quit - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 189
. 2 Start up NWadmin. 3 Select either the organization or organizational unit container that offers the print service, and then click Print Services Quick Setup on the Tools menu. 4 Enter the appropriate names in the Printer Server Name, Printer Name, Print Queue Name, and Print Queue Volume fields - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 190
Frame Type: Select Auto. (Select the frame type according to the network environment.) - Mode: Select NPrinter/RPrinter. - Printer Name: Specify the printer name. (Default: MC7450-XXXXXX) - Printer Number: Specify the printer number (0-255). When 255 is specified, the setting is Auto. 6 Restart the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 191
up NWadmin. 3 Select either the organization or organizational unit container that offers the print service, and then click Print Services Quick Setup (non-NDPS) on the Tools menu. 4 Enter the appropriate names in the Printer Server Name, Printer Name, Print Queue Name, and Print Queue Volume fields - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 192
-click the organization or organizational unit container where you will create the printer agent, and then click NDPS Printer on the Create submenu. 4 In the NDPS Printer Name box, enter the printer name. 5 In the Printer Agent Source column, select Create a New Printer Agent, and then click the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 193
the name of the cre- ated queue (or NDPS printer name). 4 In the Printer Model list, specify the folder on the CD/DVD that contains the printer driver for the operating system and printer driver to be used. 5 Follow the on-screen instructions to complete the installation. Printing With NetWare 173 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 194
174 Printing With NetWare - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 195
Printer Utilities - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 196
Yes button. The following procedure describes how to install the Printer Management Utilities. End User Tools Status Monitor PageScope Click "Top Menu" button to display top page. 5 Follow the onscreen instructions to complete the installation. 6 After the installation is complete, remove the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 197
Understanding the Ethernet Configuration Menus - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 198
DIRECT INTERFACE MENU JOB TIMEOUT ETHERNET TCP/IP ENABLE IP ADDRESS SUBNET MASK DEFAULT GATEWAY DHCP/ BOOTP TELNET NETWARE ENABLE SYS DEFAULT MENU MAINTENANCE MENU SERVICE MENU CAMERA DIRECT APPLETALK ENABLE SPEED/DUPLEX 178 Ethernet Menu - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 199
Accessing the Ethernet Menu Use the following series of keystrokes at the printer to access the Ethernet menu options on your printer. This menu provides access to all of the configurable network items. Press this key . . . (until) the message window reads. . . PROOF/PRINT MENU or if no - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 200
Using the Network Menu Options If the printer is connected to a network, the following settings should be specified. For details about each setting, contact your network administrator. " When manually setting the IP address, Subnet Mask, and Gateway turn off DHCP first. TCP/IP ENABLE Purpose - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 201
address of the router/gateway if a router/gateway is used on your network and you allow users outside your network environment to print on your printer. 0-255 for each xxx triplet Use the Up and Down keys to increase or decrease each number; use the Left and Right keys to move - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 202
NETWARE ENABLE Purpose Options Default Enables or disables NetWare. If YES is selected, NetWare is enabled. If NO is selected, NetWare is disabled. YES NO YES APPLETALK ENABLE Purpose Options Default Enables or disables AppleTalk. If YES is selected, AppleTalk is enabled. If NO is selected, - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 203
Network Printing - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 204
TCP/IP network environment, you must make sure that the internal network addresses in the printer have been set. " In many cases, you have to enter only a unique IP address. However, you may also have to enter a subnet mask and/or a - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 205
this in one of two ways. Each is explained in detail in the following sections. Using DHCP Setting the address manually Using DHCP If your network supports DHCP (Dynamic Host Configuration Protocol), the printer's IP address will be automatically assigned by the DHCP server when you turn on the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 206
driver and utilities. " If the printer cannot be connected to a DHCP server, an IP address within the range between 169.254.0.0 and 169.254.255.255 is automatically set. " If the IP address is not automatically assigned correctly, refer to "Setting the Address Manually" on page 187 to set the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 207
by using the following instructions. (See chapter 6, "Understanding the Ethernet Configuration Menus," for more information.) " When manually setting the IP address, turn off DHCP and BOOTP first. In addition, when the IP address is changed, add a new port or reinstall the printer driver. If the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 208
Press this key . . . (until) the message window reads . . . ENABLE IP ADDRESS IP ADDRESS 000.000.000.000 Use the Use the and keys to move to each of the four number triplets. and keys to increase or decrease each number. IP ADDRESS xxx.xxx.xxx.xxx 3 If you don't want to set the subnet mask or - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 209
Press this (until) the message window displays . . . key . . . Use the Use the and keys to move to each of the four number triplets. and keys to increase or decrease each number. SUBNET MASK xxx.xxx.xxx.xxx 4 If you don't want to set the gateway, go to step 5. If you want to set the gateway, - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 210
message window displays . . . Press the Cancel key 2 times to reboot the printer 6 After rebooting the printer, print a configuration page to verify that the cor- rect IP address, subnet mask PRINT MENU CONFIGURATION PG PRINT 7 Install the printer driver and utilities. 190 Network Connection - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 211
terms and the IPP printing methods. " In addition to these protocols, this printer supports EtherTalk. AppleTalk A generic name for the protocol suite developed by Apple Computer Previously called "Rendezvous", the name was changed to "Bonjour" starting with Mac OS X v10.4. Network Printing 191 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 212
a file that can be loaded into memory to boot the workstation. This enables the service provider changes with each connection, complicating public access to the Internet. By using a DDNS service connected. DHCP also supports a mix of network without the hassle of manually assigning it a unique IP - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 213
of the machine providing the desired service. This has created many administrative problems. However, SLP (Service Location Protocol) simplifies the discovery and use of network resources such as printers by automating a number of network services. It provides a framework that allows networking - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 214
SMB SMB (Server Message Block) is a protocol for sharing resources on the network, such as files and printers, in a Windows environment. If the Samba server software is used on Linux or UNIX, services using SMB can be shared. SMTP SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-mail - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 215
Features Summary section. 4 Select the Internet Printing Client check box to install the feature. 5 Restart the computer. Adding an IPP Port using the Printer Driver CD/DVD " For IPP printing, specify the network setting. Refer to "Making the Connection" on page 185 and "IPP" on page 193. 1 Insert - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 216
are detected. Select this printer. [Search Setting]: To search for printers on other networks, click this button. [Update List]: To update the printer information, click this button. 7 Select Internet Printing as the printing method from the pull-down list, and then click Next. 196 Network - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 217
Settings dialog box, click Install. [Installation Settings]: To change the settings, click this button. Click Finish. This completes the installation of the printer driver. Adding an IPP Port using Add Printer Wizard - Windows Server 2003/XP/2000 For Windows Server 2003/XP: Click start, select - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 218
com- puter) radio button and then choose Next. Windows Server 2003/XP Windows 2000 2 In the URL field in the next dialog box enter the printer's network path- name in one of the following formats and then choose Next: http://ipaddress/ipp http://ipaddress:80/ipp http://ipaddress:631/ipp - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 219
valid path in the previous step, the following message displays: "The server on which the KONICA MINOLTA magicolor 7450 printer resides does not have the correct printer driver installed. If you want to install the driver on your local computer, click OK." The reason for this is that you do not yet - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 220
4 In the dialog box, click The printer that I want isn't listed. 5 In the URL field in the next dialog box enter the printer's network path- name in one of the following formats and then choose Next: http://ipaddress/ipp http://ipaddress:80/ipp http://ipaddress:631/ipp 200 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 221
6 Choose Have Disk, locate the directory on the CD/DVD where the printer driver files are located (for example: Drivers\Windows\color\Drivers\Win_x86\PS\english), and then choose Next. 7 Finish installing the printer driver. Network Printing 201 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 222
computer's running operating system while Windows Server 2008 is running on the print server, the additional driver may not be installed correctly on the print server. To solve this problem, specify the setup information file (ntprint.inf) of the operating system with a different bit number when - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 223
client computer (64 bits) drive (for example, "C"), specified as a shared drive in step 1, as a network drive (for example, "z"). " This setting is available for only PostScript driver. 3 Install on the print server (32 bits) the driver for a 32-bit operating system. Network Printing 203 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 224
that was installed, and then click the appropriate menu command to display printer properties. 5 Select the Sharing tab, and then select the Share this printer check box. 6 Click Additional Drivers. The Additional Drivers dialog box appears. 7 Under Processor, select the x64 check box, and then - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 225
" at the same level as "ntprint.inf", specify the setup information file for a 64-bit operating system located within that folder. In addition, if the driver for a 32-bit operating system is to be installed, specify the setup information file in the folder named "i386" at the same level as "ntprint - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 226
Troubleshooting Symptom SMB printing cannot be performed well. Action Follow the procedure described below to re-install the printer on a local computer. 1. Delete the printer icon from the printer folder. 2. Delete the printer driver and SMB port from the system. 3. Use the Add Printer Wizard - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 227
Using PageScope Web Connection - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 228
used in the PageScope Web Connection screens is specified from the printer's control panel. For details on specifying the display language, refer to the User's Guide (Utilities and Documentation CD/DVD) provided with the printer. In addition, the language can be selected from the Language drop - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 229
" You cannot access PageScope Web Connection using a local (USB or Parallel) connection. When connecting with Windows Server 2008 When PageScope Web Connection is started on a computer running Windows Server 2008, only the System tab may appear, and the Job, Print and Network tabs may not. In this - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 230
be determined via WINS if the network supports it. Through the assigned name of the printer-This name comes from the IP host table (the filename is hosts) on the computer system and is usually assigned by the system administrator (for example, magicolor 7450). It may be more convenient for you - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 231
in Proxy server to open the Proxy Settings dialog box. 6 In the Exceptions text box, type a comma after the last entry and then type the printer name or the IP address of your printer. 7 Choose OK three times to return to the main browser window. 8 Enter the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 232
directory from the left pane of the dialog box. 4 Select the Manual Proxy Configuration radio button. 5 In the No Proxy for: text box, type a comma after the last entry, and then type the printer name or the IP address of your printer. 6 Choose OK to return to the main browser window. 7 Enter the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 233
navigation and configuration areas of the windows that you see in PageScope Web Connection windows. Link to KONICA MINOLTA Current status Links to main Printer name topics web site Version information Access to Administrator Mode Display language list Links to subtopics Configuration area - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 234
UP print or printing. PRINTING Warning The printer needs PAPER EMPTY TRAY 1 attention, but TONER LOW C printing continues. Error Fatal The printer needs TONER EMPTY attention before REPLACE C printing can resume. PAPER JAM TRAY2 The printer must be SERVICE CALL C002 rebooted. If that RAM - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 235
User Mode You automatically enter User Mode whenever you enter PageScope Web Connection. In User Mode you can view configuration settings but not change them. Administrator Mode In order to change any configuration settings through PageScope Web Connection, you must first enter Administrator Mode: 1 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 236
Status System Page The System page is the starting point for all access to the printer's internal web pages. On this page you find printer status and current configuration settings, printer identification, and links to all other web pages. " All of the information displayed on the System page - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 237
remotely identify possible printer problems, such as out of paper and out of toner. Device Status (Product Identifies the type of printer that you are browsing. image) The printer is pictured in the illustration with all installed options. Memory Displays the amount of memory installed in the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 238
. Item System Version Control Panel Language Country Administrator Name Description Identifies the controller firmware version. Identifies the display language for the printer control panel. Identifies the country specifications of the printer. Identifies the name of the administrator of the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 239
window provides the following information. Item Paper Source Paper Size Paper Type Paper Detail button Description Identifies the paper feed units Tray 1/2/3/4/5 installed on the printer. Indicates the size of paper loaded in a specific tray. Indicates the type of paper loaded in a specific tray - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 240
. Displays the paper types. Displays the maximum capacity for each paper tray. Displays the amount of paper remaining. Returns to the previous screen. 220 Viewing Printer Status - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 241
Output Tray The System - Detail - Output Tray window provides the following information. Item Tray Paper Description Displays the names of the output trays. Displays the status (Ready, Full) of the output trays. Viewing Printer Status 221 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 242
no memory card is installed, "-" is displayed. Used Displays the amount of space used on the memory card. If no memory card is installed, "-" is displayed. Remaining Displays the amount of space remaining on the memory card. If no memory card is installed, "-" is displayed. 222 Viewing Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 243
, IPP is enabled. If Disable is selected, IPP is disabled. If Enable is displayed, NetWare is enabled. If Disable is selected, NetWare is disabled. Viewing Printer Status 223 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 244
. IP Address Identifies the IP (Internet Protocol) address of the Ethernet interface. MAC Address Identifies the MAC (Media Access Control) address of the Ethernet interface. Host Name Identifies the host name for the printer. Print Server Identifies the Print Server Name for the Name (NetWare - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 245
type of consumable that is being monitored. Indicates the remaining life of the consumables Toner Cartridge, Imaging Unit, Transfer Belt, Fuser Unit: Percentage Waste Toner Bottle: Ready, Near Full, or Full Indicates the type of consumables Starter, Standard, High Viewing Printer Status 225 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 246
provides the following information: Item Pages Printed Sheets Printed by Paper Size Sheets Printed by Paper Type Description Indicates the number of monochrome/color pages printed and the number of normal/double-sided pages printed, respectively. Indicates the number of pages printed by paper size - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 247
for assistance. Displays the KONICA MINOLTA web address. Displays the web address where you can order printer supplies and accessories. Displays the telephone number of the printer administrator. Displays the e-mail address for support. Displays a link to the Printer Management Utilities. Viewing - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 248
Number User Name File Name Job Status Create Time Delete button Description Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number. If known, displays the owner of the print job. Displays the name of the print file. Displays - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 249
Item Job Number User Name File Name End Time Result Detail button Description Displays the print job identification number. Each print job that the printer receives is assigned a Number unique identification number. If known, displays the owner of the print job. Displays the name of the print file - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 250
File Name Delivery Type Create Time End Time Result Back button Description Displays the print job identification number. Each print job that the printer receives is assigned a Number unique identification number. If known, displays the owner of the print job. Displays the name of the print file - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 251
This page allows you to check the settings for printing when there is no PDL printer driver. Default Settings General Settings (shown above) The Print - Default Settings - General Settings binding. " This menu item appears only if an optional duplex unit is installed. Viewing Printer Status 231 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 252
Item Output Tray Copies Paper Size Width Length Paper Type Collate Unit of Measure Description Displays the name of the output tray. appears only if an optional hard disk kit is installed. The units for specifying the size of custom paper is indicated between inches and millimeters. 232 Viewing - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 253
Size. Indicates the paper width when Paper Size is set to Custom Size. Indicates the setting for the type of paper loaded into Tray 1. Viewing Printer Status 233 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 254
item appears only if Paper Type the optional lower feeder unit is installed. Indicates whether the paper size for Tray 2 is automatically detected or manually set. Indicates the setting for the size of paper Indicates which physical tray is assigned to each logical tray. 234 Viewing Printer Status - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 255
. Displays the font size in the PCL language. Displays the font pitch in the PCL language. Indicates CR/LF code definition in PCL language. Viewing Printer Status 235 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 256
. "0" means that no time-out control is effective. Displays the settings for the PS protocol. Displays whether or not error printing is performed. 236 Viewing Printer Status - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 257
in full color. If Grayscale is indicated, the pages are printed in black and white. Color Separa- If On is indicated, color separation is per- tion formed. If Off is indicated, color separation is not performed. Brightness Indicates the brightness of the printed image. Viewing Printer Status - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 258
Description Contrast Indicates the contrast of the image. Image/Text Printing (Source) Identifies the color space for RGB data. Image/Text Indicates the color intent to be used on Printing (Intent) conversion RGB to CMYK by printer. Image/Text Indicates the method to reproduce RGB Printing - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 259
black and gray for simulation printing. If On is indicated, image adjustments are applied. If Off is indicated, image adjustments are not applied. Cyan/Magenta/ Indicates the density of the highlight color. Yellow/Black (+3,+2,+1,0,-1,-2,-3) Density (Highlight) Cyan/Magenta/ Indicates the density - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 260
. Indicates the brightness for camera direct printing. Indicates the contrast for camera direct printing. Identifies the color space for RGB data with camera direct printing. Indicates the color intent to be used when the printer converts RGB to CMYK with camera direct printing. 240 Viewing - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 261
the method for reproducing RGB, black and gray in images with camera direct printing. Indicates how halftones are reproduced with - PCL Font page allows you to check the list of PCL fonts that the printer manages. Item Number Font Name Source Description Displays the control number of the font. - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 262
PS Font The Print - Download Font/Form - PS Font page allows you to check the list of PostScript fonts that the printer manages. Item Number Font Name Source Description Displays the control number of the font. Displays the name of the fonts. Displays the location of the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 263
Form Overlay The Print - Download Font/Form - Form Overlay page allows you to check the list of form overlays that the printer manages. Item Number File Name Source Description Displays the control number of the overlay. Displays the name of the overlays. Displays the location of the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 264
you to check the list of color profiles that the printer manages. Item Number File Name Profile Name Class Color Space Source Description Displays the control number of the color profile. Displays the file name of the color profile. Displays the name of the color profile. Displays the type of - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 265
Report Types The Print - Report Types window provides the following information. Item Description Configuration Page Prints the printer configuration page. Demo Page Prints the printer demo page. Statistics Page Prints the statistics page such as the number of pages printed. PCL Font Page - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 266
without starting up the application. " The printer must have the optional hard disk kit or the CompactFlash to use the Direct Print parameters described below. The following file formats can be printed using direct printing: PDF, TIF and JPEG. Item File Name Browse button Send button Description - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 267
. See "Administrator Mode" on page 215 for instructions on logging into Administrator Mode. System Page This page allows you to configure several user- and printer-specific items. Date/Time Manual Settings (shown above) The System - Date/Time - Manual Settings window allows you to configure the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 268
's internal clock. Configuration Menu Equivalent: SYS DEFAULT MENU - CLOCK - TIME Specifies the minute for the printer's internal clock. Configuration Menu Equivalent: SYS DEFAULT MENU - CLOCK - TIME Specifies the time zone for sending e-mail notifications. Applies the configuration settings for - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 269
characters Default: [Blank] " Passwords can be set to any string of numbers and letters (uppercase and lowercase) up to 16 characters in length. Configuring the Printer 249 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 270
button Resets all configuration settings to previous values. " If you forget the new password you've assigned, use the printer's SYS DEFAULT MENU - RESTORE DEFAULTS - RESTORE PRINTER menu to reset the password (and all other printer configuration choices) to administrator. 250 Configuring the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 271
following items: Item Administrator Name Device Name Device Place Description Specifies the name of the administrator for the printer. Range: Up to 255 characters Default: [Blank] Specifies the name of the printer. Range: Up to 255 characters Default: [Blank] Specifies the setup location for the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 272
Hold Job Timeout Energy Saver Description Selects whether or not a startup page is printed when the printer is turned on. Choices: On, Off Default: Off Configuration Menu Equivalent: SYS DEFAULT MENU - Sleep Configuration Menu Equivalent: SYS DEFAULT MENU ENERGY SAVER 252 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 273
is selected, printing continues even if the printer detects the life of print unit. Choices: Stop, Continue Default: Stop Configuration Menu Equivalent: SYS DEFAULT MENU IMAGING UNIT LIFE Specifies the unit system when the printer detect paper size automatically. Choices: Inch Size, Millimeter - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 274
- ROM Version window provides the following information. Item Engine ROM Version Controller ROM Version Boot ROM Version Description Displays the ROM version of the printer engine. Displays the ROM version of the printer controller. Displays the ROM version of the Boot ROM. 254 Configuring the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 275
person or organization responsible for providing assistance with the printer. Range: Up to 63 characters Default: KONICA MINOLTA Customer Support Sets the web site address for printer assistance. Range: Up to 127 characters Default: http://printer.konicaminolta.com Sets the help web site address for - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 276
Address Range: Up to 31 characters Default: [Blank] Specifies the address of the printer administrator. Contact Utility Link Range: Up to 320 characters Default: [Blank] Specifies the link to the Printer Management Utilities. Apply button Clear button Range: Up to 127 characters Default: http - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 277
Maintenance Clear Settings The System - Maintenance - Clear Settings page allows you to reset the printer settings to its factory defaults. Item Printer Settings Description Resets the printer settings to their defaults. Network Settings Configuration Menu Equivalent: SYS DEFAULT MENU - RESTORE - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 278
it OK to restore Factory Defaults?" appears. Click OK to automatically restart the printer and return the settings to their default values. The System - Maintenance - Reset Printer page allows you to reset the printer controller. Item Reset button Description When clicked, the message "Is it OK - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 279
items: Item Alert Mail Email Notice Description Specifies whether or not a notification is sent by e-mail when a warning occurs in the printer. Choices: Enable, Disable Default: Enable Email Address Specifies the e-mail address where the Notice notification is sent. Range: Up to 320 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 280
is sent when the toner is empty. Operator Call Choices: Enable, Disable Default: Enable Specifies whether or not a notification is sent when the operator must be called. Service Call Choices: Enable because an error occurred. Choices: Enable, Disable Default: Enable Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 281
Item Apply button Clear button Description Applies the configuration settings for this window. Resets all configuration settings to previous values. Configuring the Printer 261 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 282
Print Page The Print page allows more detailed printer settings to be specified. Local Interface The Print - Local Interface window allows you to configure the Applies the configuration settings for this window. Resets all configuration settings to previous values. 262 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 283
PDL Description Selects default language to be selected. Choices: Auto, PCL, PS Default: Auto Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - DEF. EMULATION Configuring the Printer 263 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 284
DEFAULT TRAY Tray3, Tray4 and Tray5 appear only if an optional lower feeder unit are installed. If Long-Edge Binding is selected, the pages will be printed - DUPLEX " This menu item appears only if the optional duplex unit is installed. Displays the name of the output tray. Specifies the default - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 285
1, Thick 2, Thick 3, Label, Transparency, Transparency 2, Envelope, Postcard, Letterhead, Glossy Default: Plain Paper Configuration Menu Equivalent: SYS DEFAULT MENU - PAPER DEFAULT PAPER - PAPER TYPE Configuring the Printer 265 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 286
Item Collate Unit of Measure item appears only if the optional hard disk kit is installed. The unit for specifying the size of custom paper can be specified between inches ) Configuration Menu Equivalent: SYS DEFAULT MENU - PAPER UNIT OF MEASURE Applies the configuration settings for this window. - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 287
Paper Source Settings Configuring the Printer 267 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 288
#4, Japanese Postcard, Japanese Postcard-D, Custom Size Default: Letter (U.S. model) A4 (Other model) Configuration Menu Equivalent: PAPER MENU - PAPER SOURCE - TRAY1 - PAPER SIZE 268 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 289
, Thick 1, Thick 2, Thick 3, Label, Transparency, Transparency 2, Envelope, Postcard, Letterhead, Glossy Default: Plain Paper Configuration Menu Equivalent: PAPER MENU - PAPER SOURCE - TRAY1 - PAPER TYPE Configuring the Printer 269 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 290
model) Configuration Menu Equivalent: PAPER MENU - PAPER SOURCE - TRAY2 - PAPER SIZE " If Auto is selected from the Size Setting menu, the printer automatically detects the paper size; Letter, Letter-R, 11x17, Legal, Executive, Statement, A3W. For Tray 2, the paper size can be selected only if - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 291
, Thick 1, Thick 2, Thick 3, Label, Transparency, Transparency 2, Envelope, Postcard, Letterhead, Glossy Default: Plain Paper Configuration Menu Equivalent: PAPER MENU - PAPER SOURCE - TRAY2 - PAPER TYPE Configuring the Printer 271 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 292
or set by a user. Tray3/4/5 Paper Size This item appears only if the optional lower feeder unit is installed. Paper Type Choices: Auto, User Select Default: Auto Configuration Menu Equivalent: PAPER MENU Menu Equivalent: PAPER MENU - PAPER SOURCE - TRAY CHAINING 272 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 293
: PAPER MENU - PAPER SOURCE - TRAY MAPPING - LOGICAL TRAY 0-9 " Physical Tray 3, Physical Tray 4 and Physical Tray 5 appear only if an optional lower feeder unit is installed. Applies the configuration settings for this window. Resets all configuration settings to previous values. Configuring the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 294
the symbol set used with the PCL language. Default: PC-8 Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - PCL - FONT SOURCE - SYMBOL SET 274 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 295
Equivalent: SYS DEFAULT MENU - EMULATION - PCL - CR/LF MAPPING Applies the configuration settings for this window. Resets all configuration settings to previous values. Configuring the Printer 275 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 296
- WAIT TIMEOUT Specifies the PS protocol. Choices: Auto, Normal, Binary Default: Auto Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - POSTSCRIPT - PS PROTOCOL 276 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 297
MENU - EMULATION - POSTSCRIPT - PS ERROR PAGE Applies the configuration settings for this window. Resets all configuration settings to previous values. Print Quality Settings Configuring the Printer 277 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 298
Off Configuration Menu Equivalent: QUALITY MENU COLOR SEPARATION Specifies the brightness of the printed image. Choices: +15%, +10%, +5%, the image. Choices: +15%, +10%, +5%, 0, -5%, -10%, -15% Default: 0 Configuration Menu Equivalent: QUALITY MENU PCL SETTING CONTRAST 278 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 299
Default: sRGB Configuration Menu Equivalent: QUALITY MENU - PCL SETTING Image/Text Specifies the color intent to be used on Printing (Intent) conversion RGB to CMYK by printer. Choices: Vivid, Photographic Default: Photographic (Image) Vivid (Text) Configuration Menu Equivalent: QUALITY MENU PCL - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 300
Equivalent: QUALITY MENU - PS SETTING Image/Text/ Specifies the color intent to be used on Graphics Print- conversion RGB to CMYK by printer. ing (RGB Intent) Choices: Vivid, Photographic, Relative Color, Absolute Color Default: Photographic (Image) Vivid (Text/Graphics) Configuration Menu - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 301
) Default: Auto Configuration Menu Equivalent: QUALITY MENU - PS SETTING Image/Text/ Specifies how halftones are reproduced. Graphics Print- ing (Halftone (Image/ Text), Same as Image Settings, Same as Text Settings (Graphics) Default: Detail (Image) Line Art (Text) Same as Image Settings - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 302
be used for simulation printing. Choices: Relative Color, Absolute Color Default: Relative Color Configuration Menu Equivalent: QUALITY MENU - PS PROFILE Tone Calibra- If On is selected, image adjustments are ting tion applied. If Off is selected, image adjustments are not applied. Choices: On - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 303
/Magenta/ Specifies the density of the highlight color. Yellow/Black Density (High- Choices: Magenta/ Specifies the density of the middle color. Yellow/Black Density (Middle) Choices: Magenta/ Specifies the density of the shadow color. Yellow/Black Density (Shadow) Choices: +3,+2,+1,0,-1,-2,-3 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 304
. If Disable is selected, camera direct printing is disabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU - CAM- ERA DIRECT 284 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 305
" Tray 3, Tray 4, and Tray 5 appear only if the optional lower Feeder unit is installed. Specifies how many successive pages in a sheet when Camera Direct printing. Choices -10%, -15% Default: 0 Configuration Menu Equivalent: CAMERA DIRECT IMAGE QUALITY BRIGHTNESS Configuring the Printer 285 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 306
space for RGB data when Camera Direct printing. Choices: Device Color, sRGB Default: sRGB Configuration Menu Equivalent: CAMERA DIRECT IMAGE QUALITY RGB SOURCE Specifies the color intent to be used on conversion RGB to CMYK by printer when Camera Direct printing. Choices: Vivid, Photographic Default - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 307
is selected, halftones are reproduced with smoothness. Choices: Line Art, Detail, Smooth Default: Detail Configuration Menu Equivalent: CAMERA DIRECT IMAGE QUALITY-HALFTONE Applies the configuration settings for this window. Resets all configuration settings to previous values. Configuring the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 308
Font/Form " This page appears only if an optional hard disk kit or a CompactFlash card is installed. PS Font " The printer must have the optional hard disk kit and/or memory card to use the PS Font parameters described below. The Print - Download Font/Form - PS Font window allow you to configure - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 309
button Form Overlay Description Deletes the postScript font file(s) whose check boxes the left end are checked. " The printer must have the optional hard disk kit and/or memory card to use the Form Overlay parameters described below. The Print - Download Font/Form - Form Overlay window allow - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 310
the form overlay file. Displays the storage source of the form overlay. Deletes the form overlay(s) whose check boxes the left end are checked. " The printer must have the optional hard disk kit and/or memory card to use the Color Profile parameters described below. 290 Configuring the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 311
Memory Card) of the color profile. Text box Specifies the file name for the color profile to be downloaded. Browse button Displays a dialog box for browsing to the color profile. Submit button Sends the specified color profile to the printer. Delete Color , overlays or color profiles. Make sure - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 312
Sets whether or not to use TCP/IP. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/ IP - ENABLE 292 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 313
Apply button is clicked. The setting returns to the previous value. Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/ IP - IP ADDRESS Sets the printer's subnet mask address. Range: 0-255 for each xxx triplet Default: 255.255.0.0 " If the specified subnet mask address is outside of the - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 314
DEFAULT GATEWAY RAW Port Number Host Name Identifies the number of the printer's RAW port. Choices: 1-65535 Default: 9100 Specifies the host characters Default: MC7450-xxxxxx " xxxxxx displays six last digits of the MAC address in hexadecimals. Specifies the domain name. DNS Server Range: Up - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 315
IP Address Filtering The Network - TCP/IP - IP Address Filtering page allows you to specify the IP address and limitations for accessing the printer. " The settings described below are not applied to the DNS server and DHCP server. " If the range of permitted IP addresses in Access Permission - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 316
address permitted access Specify the range of IP addresses permitted access to the printer. Type the IP address at the beginning of the range into the box selected, the range of IP addresses refused Address access to the printer can be specified. A maximum of five ranges of refused IP addresses - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 317
Range of IP address refused access Specify the range of IP addresses refused access to the printer. Type the IP address at the beginning of the range into the box on the left settings in this page. Clear button Resets all configuration settings to previous values. Configuring the Printer 297 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 318
. Choices: Enable, Disable Default: Enable Specify the Bonjour name for the printer. Range: Up to 63 characters Default: KONICA MINOLTA magicolor 7450(xx:xx:xx) " "xx:xx:xx" refers to the last six digits of the MAC address (in hexadecimal). Applies the configuration settings in this page. Resets - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 319
NetWare NetWare Configuring the Printer 299 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 320
Frame Type. Choices: Auto, Ethernet802.2, Ethernet 802.3, Ethernet II, Ethernet SNAP Default: Auto Mode Specifies the NetWare Configuration mode Server Name for the printer. Range: Up to 63 characters Default: MC7450-xxxxxx " xxxxxx displays six last digits of the MAC address in hexadecimals. - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 321
's name. Range: Up to 63 characters Default: MC7450-xxxxxx " xxxxxx displays six last digits of the MAC address in hexadecimals. Printer Number Sets the Printer Number. Range: 0 - 255 Default: 255 Applies the configuration settings for this window. Resets all configuration settings to previous - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 322
: Item File Server Queue Name Queue Status Description Identifies current NetWare File Server. Identifies current NetWare queue name. Identifies current NetWare status. 302 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 323
- IPP window allows you to configure the following items. For details on IPP, refer to chapter 7, "Network Printing." In order to apply the settings, the printer must be turned off, then on again after the setting is specified. Item IPP Print Accept IPP Job Description Sets whether or not to use - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 324
Item Printer Name Printer Location Printer Information Description Sets the printer's name. Range: Up to 127 characters Default: [Blank] Sets the printer's location. Range: Up to 127 characters Default: [Blank] Specifies the printer information. Range: Up to 127 characters Default: [Blank] 304 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 325
URI Description Specifies the printer's Uniform Resource Identifier (URI), authentication, and security. Range: Non-configurable Defaults: http:///ipp RequestingUserName and "https:// :443/ipp" appear only if the SSL/TLS settings are enabled. Configuring the Printer 305 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 326
Item Operational Support Apply button Clear button Print Job Validate Job Cancel Job Get is selected, Cancel Job is enabled. Default: Checked If this check box is selected, Get Printer Attribute is enabled. Default: Checked Applies the configuration settings for this window. Resets all configuration - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 327
Disables the FTP server. Choices: Enable, Disable Default: Enable Applies the configuration settings for this window. Resets all configuration settings to previous values. Configuring the Printer 307 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 328
, SNMP is enabled. Choices: Enable, Disable Default: Enable Applies the configuration settings for this window. Resets all configuration settings to previous values. 308 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 329
SMB Print is enabled. Choices: Enable, Disable Default: Enable Sets NetBIOS Name for the printer. Print Service Name Range: Up to 15 characters Default: MC7450-xxxxxx " xxxxxx displays six last digits of the MAC address in hexadecimals. Sets Print Server Name. Range: Up to 12 characters Default - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 330
AppleTalk Description If Enable is selected, AppleTalk is enabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET APPLETALK - ENABLE 310 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 331
Name Zone Name Current Zone Name Apply button Clear button Description Sets the printer name. Range: Up to 31 characters Default: MC7450-xxxxxx " xxxxxx displays six last digits of the MAC address in hexadecimals. Sets the Zone Name. Range: Up to 31 characters Default: * Identifies the current - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 332
Clear button Range: 30 - 300 (seconds) Default: 60 Applies the configuration settings for this window. Resets all configuration settings to previous values. 312 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 333
not installed. Click Setting to create a certifi- cate and specify the SSL settings. Item Setting button Description Displays the SSL/TSL Setting page. Configuring the Printer 313 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 334
no certificate is installed, this item does not appear. Removes the certificate. " If no certificate is installed, this item does not appear. 314 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 335
not appear. Next button Click to display the selected page. Cancel button Resets all configuration settings to previous values. Self-signed Certificate Setting Configuring the Printer 315 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 336
to create a certificate and specify SSL settings. Item Common Name Organization Organization Unit Description Identifies the Common Name for the printer, to be used in creation of an SSL Certificate. It is comprised of "Printer Host Name.DNS Server". If DNS Server is un-available, only the host - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 337
certificate. Click to return to the SSL/TLS Setting page. Cancel all configuration settings and return to SSL/ TLS Information page. Request a certificate Configuring the Printer 317 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 338
page allows you to configure the following items: Item Common Name Organization Organization Unit Description Identifies the Common Name for the printer, to be used in creation of an SSL Certificate. It is comprised of "Printer Host Name.DNS Server". If DNS Server is un-available, only the host - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 339
user. Click to save the data for requesting the certificate with the specified name. Click to return to the SSL/TLS Setting page. Configuring the Printer 319 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 340
to return to the SSL/TLS Setting page. Click to cancel the entered data and return to the SSL/TLS Information page. 320 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 341
a Certificate page was previously displayed, the certificate is installed. Click to return to the SSL/TLS Setting page. Returns to the previous screen. Configuring the Printer 321 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 342
to delete the certificate. Click to return to the SSL/TLS Setting page. Click to return to the SSL/TLS Information page. 322 Configuring the Printer - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 343
beside "Mode using SSL/TLS". Click to return to the SSL/TLS Setting page. Click to return to the SSL/TLS Information page. Configuring the Printer 323 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 344
be specified from the Log Accounting page. Job (shown above) The Account - Log Accounting - Job page allows you to save the job information for the printer as a file. Item Number of the By Number record to retrieve as a file Get button Description Select the number of jobs to be retrieved and - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 345
request, PageScope Web Connection 319 Chooser 115 Clear settings, PageScope Web Connection 257 Color profile, PageScope Web Connection 244, 290 Configuration Network settings 178, 292 Printer, via PageScope Web Connection 247 Consumables, PageScope Web Connection 225 Counter, PageScope Web - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 346
320 Download manager utility 176 PageScope Network Setup 176 PPD File 147 Printer driver 3, 147 Printer Management Utilities 176 Status monitor 176 Interface, PageScope Web Connection 223 IP address 180, 185 Manual setting 187 IP Address Filtering 295 IP Address Filtering, PageScope Web Connection - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 347
Page setup settings 122 Printer driver, installing 113 System requirements 112 Troubleshooting 143 Mac OS X Options 60 Page setup settings 64 Print settings 67 Printer driver, installing 3 Printer setup utility 35 Printer setup utility settings 35 System requirements 2 Troubleshooting 109 Mode using - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 348
PageScope Web Connection 237, 277 Print, PageScope Web Connection 231, 262 Color profile 244, 290 Direct Print 246 Form overlay 243, 289 General PS font 242, 288 PS settings 236, 276 Report types 245 Printer name 210 Printer Setup Utility 35 AppleTalk 28, 40 IP printing setting 31, 42 Network - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 349
mask 180, 185 Manual setting 187 Summary, PageScope Web Connection Device status 217 System requirements Linux 146 Mac OS 9 112 Mac OS X 2 System 221 Password 249 Reset printer 258 ROM version 254 Summary 217 T TCP/IP, PageScope Web Connection 292 Troubleshooting Linux 163 Mac OS 9 143 Mac OS X 109 - Konica Minolta magicolor 7450 II grafx | magicolor 7450 II Reference Guide - Page 350
330 Index
Reference Guide
4039-9572-11A