Konica Minolta magicolor 7450 II grafx magicolor 7450 II Reference Guide - Page 192

- Frame Type: Select Auto. (Select the frame type according to the network environment.) - Mode: Select PServer. - Print Server Name: Specify the print server name created in step 4. - Print Server Password: Specify only when setting from the Net- Ware server. - Print Queue Scan Rate: Specify 1. (Change as necessary.) - Bindery/NDS: Select NDS. - Preferred NDS Context Name: Specify the name of the context that connects to Pserver. - Preferred NDS Tree Name: Specify the name of the tree that Pserver logs on to. 6 Restart the printer (turn the printer off, then on again). 7 Use the NetWare server console to load MONITOR.NLM. 8 Select the connection information and, in the active connection column, check that the created Pserver is connected. For NetWare 5.x/6 Novell Distributed Print Service (NDPS) " Before specifying settings for NDPS, check that the NDPS broker and NDPS manager have been created and loaded. " Also, before performing the following procedure, check that the TCP/ IP protocol has been set in the NetWare server, and check that the IP address has been set for this machine and that this machine is on. 1 Log on to NetWare as an administrator from a client computer. 2 Start up NWadmin. 3 Right-click the organization or organizational unit container where you will create the printer agent, and then click NDPS Printer on the Create submenu. 4 In the NDPS Printer Name box, enter the printer name. 5 In the Printer Agent Source column, select Create a New Printer Agent, and then click the Create button. 6 Check the printer agent name, and then in the NDPS Manager Name box, browse through the NDPS manager names, and register one. 172 Printing With NetWare